Equation for Reinke criterion, divertor impurity fraction lower limit author: P B Lloyd, CCFE, Culham Science Centre args : output structure : residual error; constraint value; residual error in physical units; output string; units string Equation for Reinke criterion, divertor impurity fraction lower limit #=# divertor #=#=# freinke, fzactual, fzmin and hence also optional here. Logic change during pre-factoring: err, symbol, units will be assigned only if present; and con will be printed out only if present. Thesw conditions were missing. freinke : input : f-value for Reinke criterion (itv 147) fzmin : input : minimum impurity fraction from Reinke model fzactual : input : actual impurity fraction
Type | Intent | Optional | Attributes | Name | ||
---|---|---|---|---|---|---|
real(kind=dp), | intent(out) | :: | tmp_cc | |||
real(kind=dp), | intent(out) | :: | tmp_con | |||
real(kind=dp), | intent(out) | :: | tmp_err | |||
character(len=1), | intent(out) | :: | tmp_symbol | |||
character(len=10), | intent(out) | :: | tmp_units |
subroutine constraint_eqn_078(tmp_cc, tmp_con, tmp_err, tmp_symbol, tmp_units)
!! Equation for Reinke criterion, divertor impurity fraction lower limit
!! author: P B Lloyd, CCFE, Culham Science Centre
!! args : output structure : residual error; constraint value; residual error in physical units; output string; units string
!! Equation for Reinke criterion, divertor impurity fraction lower limit
!! #=# divertor
!! #=#=# freinke, fzactual, fzmin
!! and hence also optional here.
!! Logic change during pre-factoring: err, symbol, units will be assigned only if present;
!! and con will be printed out only if present. Thesw conditions were missing.
!! freinke : input : f-value for Reinke criterion (itv 147)
!! fzmin : input : minimum impurity fraction from Reinke model
!! fzactual : input : actual impurity fraction
use constraint_variables, only: freinke
use reinke_variables, only: fzactual, fzmin
implicit none
real(dp), intent(out) :: tmp_cc
real(dp), intent(out) :: tmp_con
real(dp), intent(out) :: tmp_err
character(len=1), intent(out) :: tmp_symbol
character(len=10), intent(out) :: tmp_units
! write(*,*) 'freinke, fzact, fzmin = ', freinke, ', ', fzactual, ', ', fzmin
! 1.0, 0.0, value
tmp_cc = 1.0D0 - freinke * fzactual/fzmin
!The following two pre-existing lines are not understood:
!KE note - cc is always 1, code never enters IF statement...
tmp_con = fzmin * (1.0D0 - tmp_cc)
tmp_err = fzmin * tmp_cc
tmp_symbol = '>'
tmp_units = ''
! write(*,*) 'cc, con = ', tmp_cc, ', ', tmp_con
! write(*,*) 'freinke, fzactual, fzmin = ', freinke, ', ', fzactual, ', ', fzmin
end subroutine constraint_eqn_078