Routine that parses the contents of the input file author: P J Knight, CCFE, Culham Science Centre author: J Morris, CCFE, Culham Science Centre author: F Warmer, IPP Greifswald in_file : input integer : Fortran input unit identifier out_file : input integer : Fortran output unit identifier show_changes : input integer : switch to turn on (1) or off (0) reporting of changed values This routine reads the data from the PROCESS input file (IN.DAT), dealing with comments or blank lines correctly, and sets the value of any variables found in the file. Any changes from the default values may be reported if required.
Each possible variable in this block is dealt with individually. (To add additional input variables, simply copy and edit one of the similar existing examples.) The routine also does the extremely useful function of checking that the given value for a variable lies within a sensible predefined range, and stops the program if apparently nonsensical values are attempted. A User's Guide to the PROCESS Systems Code, P. J. Knight, AEA Fusion Report AEA FUS 251, 1993
| Type | Intent | Optional | Attributes | Name | ||
|---|---|---|---|---|---|---|
| integer, | intent(in) | :: | in_file | |||
| integer, | intent(in) | :: | out_file | |||
| integer, | intent(in) | :: | show_changes |
subroutine parse_input_file(in_file,out_file,show_changes)
!! Routine that parses the contents of the input file
!! author: P J Knight, CCFE, Culham Science Centre
!! author: J Morris, CCFE, Culham Science Centre
!! author: F Warmer, IPP Greifswald
!! in_file : input integer : Fortran input unit identifier
!! out_file : input integer : Fortran output unit identifier
!! show_changes : input integer : switch to turn on (1) or off (0)
!! reporting of changed values
!! This routine reads the data from the PROCESS input file (IN.DAT),
!! dealing with comments or blank lines correctly, and sets the
!! value of any variables found in the file. Any changes
!! from the default values may be reported if required.
!! <P>Each possible variable in this block is dealt with
!! individually. (To add additional input variables, simply copy
!! and edit one of the similar existing examples.)
!! The routine also does the extremely useful function of checking
!! that the given value for a variable lies within a sensible
!! predefined range, and stops the program if apparently
!! nonsensical values are attempted.
!! A User's Guide to the PROCESS Systems Code, P. J. Knight,
!! AEA Fusion Report AEA FUS 251, 1993
!
! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
use constants, only: dcopper, dalu
use global_variables, only: run_tests, verbose, maxcal, runtitle
use build_variables, only: tf_in_cs, blbmoth, blbuith, shldoth, &
shldtth, shldlth, vgap_vv_thermalshield, plleni, fwoth, vvblgap, &
thshield_ib, thshield_ob, thshield_vb, iprecomp, &
blbpith, aplasmin, blbuoth, tfcth, &
iohcl, tftsgap, clhsf, bore, plleno, scrapli, gapomin, ddwex, &
rinboard, blnkoth, fseppc, plsepo, blnkith, &
ohcth, plsepi, blbmith, gapoh, fcspc, scraplo, vgaptop, &
blbpoth, gapds, fwith, vgap_xpoint_divertor, shldith, sigallpc, tfootfi, f_avspace,&
r_cp_top, d_vv_in, d_vv_out, d_vv_top, d_vv_bot, f_r_cp, i_r_cp_top
use buildings_variables, only: hcwt, conv, wgt, trcl, rbwt, &
esbldgm3, fndt, row, wgt2, pibv, clh1, stcl, clh2, &
tfcbv, hccl, rbrt, triv, shov, admv, i_bldgs_v, i_bldgs_size, &
mbvfac, pfbldgm3, wsvfac, rbvfac, rxcl, shmf, &
aux_build_l, aux_build_w, aux_build_h, auxcool_l, auxcool_w, auxcool_h, &
bioshld_thk, chemlab_l, chemlab_w, chemlab_h, control_buildings_l, &
control_buildings_w, control_buildings_h, crane_arm_h, crane_clrnc_h, &
crane_clrnc_v, cryomag_l, cryomag_w, cryomag_h, cryostore_l, &
cryostore_w, cryostore_h, cryostat_clrnc, elecdist_l, elecdist_w, &
elecdist_h, elecload_l, elecload_w, elecload_h, elecstore_l, &
elecstore_w, elecstore_h, fc_building_l, fc_building_w, &
gas_buildings_l, gas_buildings_w, gas_buildings_h, ground_clrnc, &
hcd_building_l, hcd_building_w, hcd_building_h, hw_storage_l, &
hw_storage_w, hw_storage_h, heat_sink_l, heat_sink_w, heat_sink_h, &
hot_sepdist, hotcell_h, ilw_smelter_l, ilw_smelter_w, ilw_smelter_h, &
ilw_storage_l, ilw_storage_w, ilw_storage_h, llw_storage_l, &
llw_storage_w, llw_storage_h, magnet_pulse_l, magnet_pulse_w, &
magnet_pulse_h, magnet_trains_l, magnet_trains_w, magnet_trains_h, &
maint_cont_l, maint_cont_w, maint_cont_h, nbi_sys_l, nbi_sys_w, &
qnty_sfty_fac, reactor_clrnc, reactor_fndtn_thk, reactor_hall_l, &
reactor_hall_w, reactor_hall_h, reactor_roof_thk, reactor_wall_thk, &
robotics_l, robotics_w, robotics_h, sec_buildings_l, sec_buildings_w, &
sec_buildings_h, staff_buildings_h, staff_buildings_area, &
transp_clrnc, turbine_hall_l, turbine_hall_w, turbine_hall_h, &
tw_storage_l, tw_storage_w, tw_storage_h, warm_shop_l, warm_shop_w, &
warm_shop_h, water_buildings_l, water_buildings_w, water_buildings_h, &
workshop_l, workshop_w, workshop_h
use constraint_variables, only: flhthresh, fpeakb, fpsep, fdivcol, ftcycl, &
betpmx, fpsepbqar, ftmargtf, fradwall, fptfnuc, fnesep, fportsz, tbrmin, &
maxradwallload, pseprmax, fdene, fniterpump, fpinj, pnetelin, powfmax, &
fgamcd, ftbr, mvalim, taulimit, walalw, fmva, fradpwr, nflutfmax, fipir, &
fauxmn, fiooic, fcwr, fjohc0, frminor, psepbqarmax, ftpeak, bigqmin, &
fstrcond, fptemp, ftmargoh, fvs, fbetatry, vvhealw, fpnetel, ftburn, &
ffuspow, fpsepr, ptfnucmax, fvdump, pdivtlim, ftaulimit, nbshinefmax, &
fcqt, fzeffmax, fstrcase, fhldiv, foh_stress, fwalld, gammax, fjprot, &
ftohs, tcycmn, auxmin, zeffmax, peakfactrad, fdtmp, fpoloidalpower, &
fnbshinef, freinke, fvvhe, fqval, fq, fmaxvvstress, fbetap, fbeta, fjohc, &
fflutf, bmxlim, tbrnmn, fbetatry_lower, fecrh_ignition, fstr_wp, fncycle
use cost_variables, only: ucich, uctfsw, dintrt, ucblbe, uubop, dtlife, &
cost_factor_vv, cfind, uccry, fcap0cp, uccase, uuves, cconshtf, conf_mag, &
ucbllipb, ucfuel, uumag, ucpfbs, ireactor, uucd, div_umain_time, div_nu, &
maintenance_gen, uctfps, uufw, tbktrepl, cost_factor_fwbs, decomf, &
cconshpf, uche3, ucpfdr1, ucech, uudiv, cost_model, adivflnc, &
cost_factor_rh, cost_factor_bop, ifueltyp, fcontng, fwbs_nref, &
cost_factor_buildings, favail, cconfix, ucblli2o, abktflnc, ucf1, ucfnc, &
ucpfps, iavail, ibkt_life, life_dpa, ucpfbk, cost_factor_tf_coils, costexp_pebbles, &
ucmisc, cpstflnc, uccryo, costexp, fwbs_nu, ucpfic, ucblbreed, tcomrepl, uufuel, &
ucdiv, uccpcl1, discount_rate, uctfbr, uccpclb, ucoam, div_prob_fail, ucnbi, &
uccu, ucwst, cfactr, div_nref, amortization, ucwindtf, ucme, csi, cowner, &
cost_factor_misc, fcr0, cturbb, lsa, fcap0, output_costs, &
cost_factor_land, redun_vacp, ucrb, uctfbus, num_rh_systems, fkind, &
fwbs_umain_time, uchrs, avail_min, uciac, ucshld, tdivrepl, &
ucblli, ucpfcb, tlife, ipnet, fcdfuel, ucbus, ucpfb, uchts, &
maintenance_fwbs, fwbs_prob_fail, uclh, ucblss, ucblvd, ucsc, ucturb, &
ucpens, cland, ucwindpf, i_cp_lifetime, cplife_input, &
startupratio, tmain, u_unplanned_cp, supercond_cost_model
use current_drive_variables, only: pinjfixmw, etaech, pinjalw, etanbi, &
ftritbm, gamma_ecrh, pheat, beamwd, enbeam, pheatfix, bootstrap_current_fraction_max, &
forbitloss, nbshield, tbeamin, feffcd, iefrf, iefrffix, irfcd, cboot, &
etalh, frbeam, harnum, xi_ebw, wave_mode
use divertor_variables, only: fdfs, anginc, divdens, divclfr, c4div, &
c5div, ksic, fififi, flux_exp, divplt, delld, c2div, beta_div, betao, divdum, tdiv, c6div, &
omegan, prn1, frrp, xpertin, c1div, betai, bpsout, xparain, fdiva, &
zeffdiv, hldivlim, rlenmax, divfix, c3div, &
hldiv, i_hldiv
use fwbs_variables, only: fblhebpo, vfblkt, fdiv, fvolso, fwcoolant, &
pitch, iblanket, blktmodel, afwi, fblli2o, nphcdin, breeder_multiplier, &
fw_armour_thickness, roughness, fwclfr, breedmat, fblli, fblvd, &
iblanket_thickness, vfcblkt, breeder_f, fbllipb, fhcd, vfshld, fblhebmi, &
denw, f_neut_shield, fw_th_conductivity, nblktmodti, fw_wall, afwo, &
fvolsi, etahtp, nblktmodpo, fwpressure, emult, fwoutlet, nblktmodpi, &
fblhebpi, fblss, inlet_temp, outlet_temp, fblbreed, qnuc, blpressure, &
blpressure_liq, n_liq_recirc, pnuc_fw_ratio_dcll, f_nuc_pow_bz_struct, &
declblkt, fblhebmo, blkttype, afw, inuclear, declshld, hcdportsize, &
npdiv, peaking_factor, primary_pumping, rpf2dewar, secondary_cycle, secondary_cycle_liq, &
denstl, declfw, nphcdout, iblnkith, vfpblkt, fwinlet, wallpf, fblbe, &
fhole, fwbsshape, coolp, tfwmatmax, irefprop, fw_channel_length, &
li6enrich, etaiso, nblktmodto, fvoldw, i_shield_mat, i_bb_liq, &
icooldual, ifci, inlet_temp_liq, outlet_temp_liq, bz_channel_conduct_liq, ipump, ims, &
coolwh, emult
use heat_transport_variables, only: htpmw_fw, baseel, fmgdmw, htpmw_div, &
pwpm2, etath, vachtmw, iprimshld, fpumpdiv, pinjmax, htpmw_blkt, etatf, &
htpmw_min, fpumpblkt, ipowerflow, htpmw_shld, fpumpshld, trithtmw, &
fpumpfw, crypmw_max, f_crypmw
use ife_variables, only: bldzu, etali, sombdr, gainve, cdriv0, v1dzl, &
bldrc, fauxbop, pfusife, dcdrv0, fwdr, pdrive, mcdriv, ucconc, shdr, &
v3dzu, bldzl, rrin, maxmat, shmatf, fwmatf, drveff, flirad, shdzu, v2dzu, &
pifecr, ifedrv, v2dr, chmatf, v1dr, v1matf, dcdrv1, chdzu, dcdrv2, &
ifetyp, fwdzl, htpmw_ife, uccarb, v3matf, fbreed, edrive, ptargf, cdriv2, &
fburn, fwdzu, etave, v3dr, uctarg, shdzl, ucflib, v3dzl, v1dzu, v2dzl, &
chdzl, chrad, cdriv1, tgain, somtdr, v2matf, rrmax, bldr, frrmax, &
blmatf, ife
use impurity_radiation_module, only: coreradius, nimp, &
coreradiationfraction, fimp
use numerics, only: factor, boundl, minmax, neqns, nvar, epsfcn, ixc, &
epsvmc, ftol, ipnvars, ioptimz, nineqns, ipeqns, boundu, icc, ipnfoms, name_xc
use pfcoil_variables, only: rhopfbus, rjconpf, zref, fcuohsu, oh_steel_frac, vf, &
coheof, sigpfcalw, alstroh, ipfres, fcupfsu, fvssu, etapsu, i_cs_stress, &
fbmaxcs, ngc, rpf2, fcohbop, ohhghf, vfohc, isumatoh, ngrpmx, ngc2, rpf1, &
ngrp, isumatpf, nfxfh, alfapf, routr, sigpfcf, pfclres, bmaxcs_lim, &
ncls, nfixmx, cptdin, ipfloc, i_sup_pf_shape, rref, i_pf_current, &
ccl0_ma, ccls_ma, ld_ratio_cst
use physics_variables, only: ipedestal, taumax, i_single_null, fvsbrnni, &
rhopedt, cvol, fdeut, ffwal, iculbl, itartpf, ilhthresh, &
fpdivlim, epbetmax, isc, kappa95, aspect, cwrmax, nesep, c_beta, csawth, dene, &
ftar, plasma_res_factor, ssync, rnbeam, beta, neped, hfact, dnbeta, &
fgwsep, rhopedn, tratio, q0, ishape, fne0, ignite, ftrit, &
ifalphap, tauee_in, alphaj, alphat, i_plasma_current, q, ti, tesep, rli, triang, &
itart, ralpne, iprofile, triang95, rad_fraction_sol, betbm0, protium, &
teped, fhe3, iwalld, gamma, falpha, fgwped, tbeta, i_bootstrap_current, &
iradloss, te, alphan, rmajor, kappa, iinvqd, fkzohm, beamfus0, &
tauratio, idensl, bt, iscrp, ipnlaws, betalim, betalim_lower, &
i_diamagnetic_current, i_pfirsch_schluter_current, m_s_limit, burnup_in
use pf_power_variables, only: iscenr, maxpoloidalpower
use pulse_variables, only: lpulse, dtstor, itcycl, istore, bctmp
use primary_pumping_variables, only: t_in_bb, t_out_bb, dp_he, p_he, gamma_he, &
dp_fw_blkt, dp_fw, dp_blkt, dp_liq
use scan_module, only: isweep_2, nsweep, isweep, scan_dim, nsweep_2, &
sweep_2, sweep, ipnscns, ipnscnv
use stellarator_variables, only: f_asym, isthtr, n_res, iotabar, fdivwet, &
f_w, bmn, shear, m_res, f_rad, flpitch, istell, max_gyrotron_frequency, &
te0_ecrh_achievable
use tfcoil_variables, only: fcoolcp, tfinsgap, vftf, &
fhts, dr_tf_wp, rcool, rhotfleg, thkcas, &
casthi, n_pancake, bcritsc, i_tf_sup, str_pf_con_res, thwcndut, &
thicndut, tftmp, oacdcp, tmax_croco, ptempalw, tmargmin_tf, tmpcry, &
sig_tf_case_max, dztop, dcond, str_cs_con_res, etapump, drtop, vcool, dcondins, &
i_tf_tresca, dhecoil, tmaxpro, n_tf, tcpav, fcutfsu, jbus, &
casthi_fraction, tmargmin_cs, vdalw, dcase, t_turn_tf,&
cpttf_max, tdmptf, casths, i_tf_turns_integer, quench_model, &
tcritsc, layer_ins, tinstf, n_layer, tcoolin, ripmax, frhocp, &
cpttf, tmargmin, casths_fraction, eff_tf_cryo, eyoung_ins, &
eyoung_steel, eyoung_res_tf_buck, eyoung_cond_axial, f_vforce_inboard, &
fcoolleg, frholeg, ftoroidalgap, i_tf_sc_mat, i_tf_shape, i_tf_bucking, &
n_tf_graded_layers, n_tf_joints, n_tf_joints_contact, poisson_al, &
poisson_copper, poisson_steel, rho_tf_joints, rhotfbus, th_joint_contact,&
i_tf_stress_model, eyoung_al, i_tf_wp_geom, i_tf_case_geom, &
i_tf_turns_integer, n_rad_per_layer, b_crit_upper_nbti, t_crit_nbti, &
i_cp_joints, n_tf_turn, f_t_turn_tf, t_turn_tf_max, t_cable_tf, &
sig_tf_wp_max, eyoung_cond_trans, i_tf_cond_eyoung_axial, i_tf_cond_eyoung_trans, &
str_wp_max, str_tf_con_res, i_str_wp, max_vv_stress, theta1_coil, theta1_vv
use times_variables, only: tohs, pulsetimings, tqnch, t_fusion_ramp, tramp, tburn, &
tdwell, tohsin
use vacuum_variables, only: dwell_pump, pbase, tn, pumpspeedfactor, &
initialpressure, outgasfactor, prdiv, pumpspeedmax, rat, outgasindex, &
pumpareafraction, ntype, vacuum_model, pumptp
use rebco_variables, only: hastelloy_thickness, f_coppera_m2, &
rebco_thickness, tape_thickness, tape_width, &
copper_rrr, coppera_m2_max, croco_thick, copper_thick, f_copperaoh_m2, &
copperaoh_m2, copperaoh_m2_max
use reinke_variables, only: reinke_mode, fzactual, impvardiv, lhat
use water_usage_variables, only: airtemp, watertemp, windspeed
use CS_fatigue_variables, only: residual_sig_hoop, t_crack_radial, t_crack_vertical, &
t_structural_vertical, t_structural_radial, n_cycle_min, bkt_life_csf, sf_vertical_crack, &
sf_radial_crack, sf_fast_fracture ,paris_coefficient, paris_power_law, walker_coefficient, &
fracture_toughness
implicit none
! Arguments
integer, intent(in) :: in_file, out_file, show_changes
! Local variables
integer :: iost
integer :: isub1,isub2,varlen
integer :: no_constraints
integer :: no_iteration
integer :: foundAst
character(len=32) :: varnam
logical :: obsolete_var
! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! Initialise local variables
no_constraints = 0
no_iteration = 0
obsolete_var = .false.
! Initialise module-wide variables
infile = in_file
outfile = out_file
report_changes = show_changes
icode = 0
lineno = 0
! Main loop
loop_over_lines: do
subscript_present = .FALSE.
read(infile,'(A)',iostat=iost) line
! On error or end, return
if (iost /= 0) exit loop_over_lines
lineno = lineno + 1
line = adjustl(line) ! rotate any leading blanks to the end
linelen = len_trim(line)
20 continue
! Ignore blank lines
if (line == ' ') cycle
! Ignore comments, unless they start with '*****',
! in which case print them.
if (line(1:5) == '*****') write(outfile,*) line(1:76)
if (line(1:1) == '*') cycle
if (line(1:1) == '$') cycle ! in case block delimiters are still present
iptr = 1
!Ignore input comments denoted by asterisk, before assigning variables
if (index(line,'*') > 0) then
foundAst = index(line,'*') - 1
linelen = min(linelen, foundAst)
line = line(:linelen)
end if
! This must be an assignment line, so get the variable name
call get_variable_name(varnam,varlen,isub1,isub2)
if (isub1 /= 0) subscript_present = .TRUE.
if (varlen == 0) then
write(*,*) 'Error in IN.DAT at line ', lineno
write(*,*) line
error = .True.
end if
! Read the associated data
variable: select case (varnam(1:varlen))
! General settings
case ('runtitle')
call parse_string_variable('runtitle', runtitle, &
'title of run')
case ('verbose')
call parse_int_variable('verbose', verbose, 0, 1, &
'Switch for diagnostic output')
case ('run_tests')
call parse_int_variable('run_tests', run_tests, 0, 1, &
'Switch for running built-in tests')
! Numerical solver settings
case ('boundl')
call parse_real_array('boundl', boundl, isub1, ipnvars, &
'Iteration variable lower bound', icode)
case ('boundu')
call parse_real_array('boundu', boundu, isub1, ipnvars, &
'Iteration variable upper bound', icode)
case ('epsfcn')
call parse_real_variable('epsfcn', epsfcn, 0.0D0, 1.0D0, &
'HYBRD/VMCON derivative step length')
case ('epsvmc')
call parse_real_variable('epsvmc', epsvmc, 0.0D0, 1.0D0, &
'VMCON error tolerance')
case ('factor')
call parse_real_variable('factor', factor, 0.0D0, 10.0D0, &
'HYBRD initial step size')
case ('ftol')
call parse_real_variable('ftol', ftol, 0.0D0, 1.0D0, &
'HYBRD tolerance')
! New optional argument startindex used MDK 3/3/17
! Allows simplified IN.DAT format for icc and ixc.
case ('icc')
no_constraints = no_constraints + 1
call parse_int_array('icc', icc, isub1, ipeqns, &
'Constraint equation', icode,no_constraints)
no_constraints = isub1
case ('ixc')
no_iteration = no_iteration + 1
call parse_int_array('ixc', ixc, isub1, ipnvars, &
'Iteration variable', icode,no_iteration)
no_iteration = isub1
case ('ioptimz')
call parse_int_variable('ioptimz', ioptimz, -2, 1, &
'Switch for solver method')
case ('maxcal')
call parse_int_variable('maxcal', maxcal, 0, 10000, &
'Max no of VMCON iterations')
case ('minmax')
call parse_int_variable('minmax', minmax, -ipnfoms, ipnfoms, 'Switch for figure of merit')
case ('neqns')
call parse_int_variable('neqns', neqns, 1, ipeqns, 'No of equality constraints')
case ('nineqns')
call parse_int_variable('nineqns', nineqns, 1, ipeqns, 'No of inequality constraints')
case ('nvar')
write(*,*)'The number of iteration variables is counted automatically and does not need to be stated in IN.DAT.'
! call parse_int_variable('nvar', nvar, 1, ipnvars, 'No of independent variables')
! Physics settings
case ('alphaj')
call parse_real_variable('alphaj', alphaj, 0.0D0, 10.0D0, &
'Current density profile factor')
case ('alphan')
call parse_real_variable('alphan', alphan, 0.0D0, 10.0D0, &
'Density profile factor')
case ('alphat')
call parse_real_variable('alphat', alphat, 0.0D0, 10.0D0, &
'Temperature profile factor')
case ('aspect')
call parse_real_variable('aspect', aspect, 1.001D0, 40.0D0, &
'Aspect ratio')
case ('beamfus0')
call parse_real_variable('beamfus0', beamfus0, 0.01D0, 10.0D0, &
'Beam-background fusion multiplier')
case ('beta')
call parse_real_variable('beta', beta, 0.0D0, 1.0D0, &
'Plasma beta')
case ('betalim')
call parse_real_variable('betalim', betalim, 0.0D0, 1.0D0, &
'Plasma beta upper limit')
case ('betalim_lower')
call parse_real_variable('betalim_lower', betalim_lower, 0.0D0, 1.0D0, &
'Plasma beta lower limit')
case ('betbm0')
call parse_real_variable('betbm0', betbm0, 0.0D0, 10.0D0, &
'Leading coeff. for NB beta fraction')
case ('bt')
call parse_real_variable('bt', bt, 0.0D0, 30.0D0, &
'Toroidal field on axis (T)')
case ('burnup_in')
call parse_real_variable('burnup_in', burnup_in, 0.0D0, 1.0D0, &
'User input plasma fuel burnup fraction')
case ('coreradius')
call parse_real_variable('coreradius', coreradius, 0.0D0, 1.0D0, &
'Normalised core radius')
case ('coreradiationfraction')
call parse_real_variable('coreradiationfraction', coreradiationfraction, 0.0D0, 1.0D0, &
'Fraction of core radiation subtracted from P_L')
case ('c_beta')
call parse_real_variable('c_beta', c_beta, 0.0D0, 1.0D0, &
'Destabalisation parameter for iprofile=6')
case ('csawth')
call parse_real_variable('csawth', csawth, 0.0D0, 10.0D0, &
'Coefficient for sawteeth effects')
case ('cvol')
call parse_real_variable('cvol', cvol, 0.01D0, 10.0D0, &
'Plasma volume multiplier')
case ('cwrmax')
call parse_real_variable('cwrmax', cwrmax, 1.0D0, 3.0D0, &
'Max conducting shell to rminor radius')
case ('dene')
call parse_real_variable('dene', dene, 1.0D18, 1.0D22, &
'Electron density (/m3)')
case ('dnbeta')
call parse_real_variable('dnbeta', dnbeta, 0.0D0, 20.0D0, &
'beta coefficient')
case ('epbetmax')
call parse_real_variable('epbetmax', epbetmax, 0.01D0, 10.0D0, &
'Max epsilon*beta value')
case ('falpha')
call parse_real_variable('falpha', falpha, 0.0D0, 1.0D0, &
'Fraction of alpha power deposited to plasma')
case ('ftar')
call parse_real_variable('ftar', ftar, 0.0D0, 1.0D0, &
'Fraction of power to divertor with lower divertor in double null')
case ('fdeut')
call parse_real_variable('fdeut', fdeut, 0.0D0, 1.0D0, &
'Deuterium fuel fraction')
case ('ffwal')
call parse_real_variable('ffwal', ffwal, 0.0D0, 10.0D0, &
'Wall load fiddle factor')
case ('fgwped')
call parse_real_variable('fgwped', fgwped, -1.0D0, 5.0D0, &
'Fraction of n_G at pedestal top')
case ('fgwsep')
call parse_real_variable('fgwsep', fgwsep, -1.0D0, 1.0D0, &
'Fraction of n_G at separatrix')
case ('fhe3')
call parse_real_variable('fhe3', fhe3, 0.0D0, 1.0D0, &
'Helium-3 fuel fraction')
case ('fimp')
call parse_real_array('fimp', fimp, isub1, nimp, &
'Impurity density fraction', icode)
case ('fkzohm')
call parse_real_variable('fkzohm', fkzohm, 0.5D0, 2.0D0, &
'Zohm elongation scaling multiplier')
case ('fnesep')
call parse_real_variable('fnesep', fnesep, 0.1D0, 2.0D1, &
'f-value for Eich critical separatrix density')
case ('ftaulimit')
call parse_real_variable('ftaulimit', ftaulimit, 0.001D0, 1.0D0, &
'f-value for lower limit on taup/taueff the ratio of alpha particle to energy confinement times')
case ('ftrit')
call parse_real_variable('ftrit', ftrit, 0.0D0, 1.0D0, &
'Tritium fuel fraction')
case ('fvsbrnni')
call parse_real_variable('fvsbrnni', fvsbrnni, 0.0D0, 1.0D0, &
'Non-inductive volt-sec burn fraction')
case ('gamma')
call parse_real_variable('gamma', gamma, 0.1D0, 1.0D0, &
'Ejima coefficient for resistive V-s formula')
case ('hfact')
call parse_real_variable('hfact', hfact, 0.01D0, 10.0D0, &
'Energy confinement time H factor')
case ('taumax')
call parse_real_variable('taumax', taumax, 0.1D0, 100.0D0, &
'Maximum allowed energy confinement time (s)')
case ('i_bootstrap_current')
call parse_int_variable('i_bootstrap_current', i_bootstrap_current, 1, 5, &
'Switch for bootstrap scaling')
case ('iculbl')
call parse_int_variable('iculbl', iculbl, 0, 3, &
'Switch for beta limit scaling')
case ('i_plasma_current')
call parse_int_variable('i_plasma_current', i_plasma_current, 1, 9, &
'Switch for plasma current scaling')
case ('idensl')
call parse_int_variable('idensl', idensl, 1, 7, &
'Switch for enforced density limit')
case ('i_diamagnetic_current')
call parse_int_variable('i_diamagnetic_current', i_diamagnetic_current, 0, 2, &
'Switch for diamagnetic scaling')
case ('ifalphap')
call parse_int_variable('ifalphap', ifalphap, 0, 1, &
'Switch for fast alpha pressure fit')
case ('ignite')
call parse_int_variable('ignite', ignite, 0, 1, &
'Switch for ignited plasma assumption')
case ('iinvqd')
call parse_int_variable('iinvqd', iinvqd, 0, 1, &
'Switch for inverse quadrature')
case ('ilhthresh')
call parse_int_variable('ilhthresh', ilhthresh, 1, 21, &
'Switch for L-H power threshold to enforce')
write(outfile,*) 'impvar is now deprecated - use iteration variables 125-136 instead.'
case ('ipedestal')
call parse_int_variable('ipedestal', ipedestal, 0, 1, &
'Switch for plasma profile type')
case ('iprofile')
call parse_int_variable('iprofile', iprofile, 0, 6, &
'Switch for current profile consistency')
case ('i_pfirsch_schluter_current')
call parse_int_variable('i_pfirsch_schluter_current', i_pfirsch_schluter_current, 0, 1, &
'Switch for Pfirsch-Schlüter scaling')
case ('iradloss')
call parse_int_variable('iradloss', iradloss, 0, 2, &
'Switch for radiation loss term inclusion in power balance')
case ('isc')
call parse_int_variable('isc', isc, 1, ipnlaws, &
'Switch for confinement scaling law')
case ('iscrp')
call parse_int_variable('iscrp', iscrp, 0, 1, &
'Switch for scrapeoff width')
case ('ishape')
call parse_int_variable('ishape', ishape, 0, 11, &
'Switch for plasma shape vs. aspect')
case ('itart')
call parse_int_variable('itart', itart, 0, 1, &
'Switch for tight aspect ratio physics')
case ('itartpf')
call parse_int_variable('itartpf', itartpf, 0, 1, &
'Switch for tight aspect ratio PF coils')
case ('iwalld')
call parse_int_variable('iwalld', iwalld, 1, 2, &
'Switch for wall load calculation')
case ('kappa')
call parse_real_variable('kappa', kappa, 0.99D0, 5.0D0, &
'Plasma separatrix elongation')
case ('kappa95')
call parse_real_variable('kappa95', kappa95, 0.99D0, 5.0D0, &
'Plasma 95% elongation')
case ('neped')
call parse_real_variable('neped', neped, 0.0D0, 1.0D21, &
'Electron density pedestal height (/m3)')
case ('nesep')
call parse_real_variable('nesep', nesep, 0.0D0, 1.0D21, &
'Electron density at separatrix (/m3)')
case('m_s_limit')
call parse_real_variable('m_s_limit', m_s_limit, 0.0D0, 1.0D0, &
'Vertical stablity margin limit')
case ('plasma_res_factor')
call parse_real_variable('plasma_res_factor', plasma_res_factor, 0.0D0, 1.0D0, &
'Plasma resistivity pre-factor')
case ('q')
call parse_real_variable('q', q, 1.00D0, 50.0D0, &
'Safety factor near plasma edge')
case ('q0')
call parse_real_variable('q0', q0, 0.01D0, 20.0D0, &
'Safety factor on axis')
case ('tauratio')
call parse_real_variable('tauratio', tauratio, 0.1D0, 100.0D0, &
'Ratio of He and pellet particle confinement times')
case ('rad_fraction_sol')
call parse_real_variable('rad_fraction_sol', rad_fraction_sol, 0.0D0, 1.0D0, &
'SoL radiation fraction')
case ('ralpne')
call parse_real_variable('ralpne', ralpne, 1.0D-12, 1.0D0, &
'Thermal alpha density / electron density')
case ('protium')
call parse_real_variable('protium', protium, 0.0D0, 1.0D0, &
'Protium density / electron density')
case ('rhopedn')
call parse_real_variable('rhopedn', rhopedn, 0.01D0, 1.0D0, &
'Density pedestal r/a')
case ('rhopedt')
call parse_real_variable('rhopedt', rhopedt, 0.01D0, 1.0D0, &
'Temperature pedestal r/a')
case ('rli')
call parse_real_variable('rli', rli, 0.0D0, 10.0D0, &
'Normalised inductivity')
case ('rmajor')
call parse_real_variable('rmajor', rmajor, 0.1D0, 50.0D0, &
'Plasma major radius (m)')
case ('rnbeam')
call parse_real_variable('rnbeam', rnbeam, 0.0D0, 1.0D0, &
'Hot beam density / electron density')
case ('i_single_null')
call parse_int_variable('i_single_null', i_single_null, 0, 1, &
'Switch for single/double null plasma')
case ('ssync')
call parse_real_variable('ssync', ssync, 0.0D0, 1.0D0, &
'Synchrotron wall reflectivity factor')
case ('tbeta')
call parse_real_variable('tbeta', tbeta, 0.0D0, 4.0D0, &
'Temperature profile index beta')
case ('te')
call parse_real_variable('te', te, 1.0D0, 200.0D0, &
'Electron temperature (keV)')
case ('tauee_in')
call parse_real_variable('tauee_in', tauee_in, 0.0D0, 100.0D0, &
'Input electron energy confinement time (sec) (isc=48 only)')
case ('taulimit')
call parse_real_variable('taulimit', taulimit, 1.0D0, 100.0D0, &
'Lower limit on taup/taueff the ratio of alpha particle to energy confinement times')
case ('teped')
call parse_real_variable('teped', teped, 0.0D0, 20.0D0, &
'Electron temperature pedestal height (keV)')
case ('tesep')
call parse_real_variable('tesep', tesep, 0.0D0, 20.0D0, &
'Electron temperature at separatrix (keV)')
case ('ti')
call parse_real_variable('ti', ti, 5.0D0, 50.0D0, &
'Ion temperature (keV)')
case ('tratio')
call parse_real_variable('tratio', tratio, 0.0D0, 2.0D0, &
'Ion / electron temperature ratio')
case ('triang')
call parse_real_variable('triang', triang, -1.0D0, 1.0D0, &
'Plasma separatrix triangularity')
case ('triang95')
call parse_real_variable('triang95', triang95, 0.0D0, 1.0D0, &
'Plasma 95% triangularity')
! Inequality settings
case ('fniterpump')
call parse_real_variable('fniterpump', fniterpump, 0.001D0, 10.0D0, &
'f-value for constraint on number of vacuum pumps')
case ('auxmin')
call parse_real_variable('auxmin', auxmin, 0.01D0, 100.0D0, &
'Minimum auxiliary power (MW)')
case ('betpmx')
call parse_real_variable('betpmx', betpmx, 0.01D0, 2.0D0, &
'Maximum poloidal beta')
case ('bigqmin')
call parse_real_variable('bigqmin', bigqmin, 0.01D0, 100.0D0, &
'Minimum fusion gain Q')
case ('bmxlim')
call parse_real_variable('bmxlim', bmxlim, 0.1D0, 50.0D0, &
'Maximum toroidal field (T)')
case ('fauxmn')
call parse_real_variable('fauxmn', fauxmn, 0.001D0, 10.0D0, &
'F-value for minimum auxiliary power')
case ('fbeta')
call parse_real_variable('fbeta', fbeta, 0.001D0, 10.0D0, &
'F-value for eps.betap beta limit')
case ('fbetap')
call parse_real_variable('fbetap', fbetap, 0.001D0, 10.0D0, &
'F-value for poloidal beta limit')
case ('fbetatry')
call parse_real_variable('fbetatry', fbetatry, 0.001D0, 10.0D0, &
'F-value for beta limit')
case ('fbetatry_lower')
call parse_real_variable('fbetatry_lower', fbetatry_lower, 0.001D0, 10.0D0, &
'F-value for (lower) beta limit')
case ('fecrh_ignition')
call parse_real_variable('fecrh_ignition', fecrh_ignition, 0.001D0, 10.0D0, &
'F-value for ecrh ignition constraint')
case ('fcwr')
call parse_real_variable('fcwr', fcwr, 0.001D0, 10.0D0, &
'F-value for conducting wall radius')
case ('fdene')
call parse_real_variable('fdene', fdene, 0.001D0, 10.0D0, &
'F-value for density limit')
case ('fdivcol')
call parse_real_variable('fdivcol', fdivcol, 0.001D0, 10.0D0, &
'F-value for divertor collisionality')
case ('fdtmp')
call parse_real_variable('fdtmp', fdtmp, 0.001D0, 10.0D0, &
'F-value for first wall coolant temp rise')
case ('fgamcd')
call parse_real_variable('fgamcd', fgamcd, 0.001D0, 10.0D0, &
'F-value for current drive gamma')
case ('fipir')
call parse_real_variable('fipir', fipir, 0.001D0, 10.0D0, &
'F-value for Ip/Irod')
case ('fjohc')
call parse_real_variable('fjohc', fjohc, 0.001D0, 10.0D0, &
'F-value for Central Solenoid current at EOF')
case ('fjohc0')
call parse_real_variable('fjohc0', fjohc0, 0.001D0, 10.0D0, &
'F-value for Central Solenoid current at BOP')
case ('fhldiv')
call parse_real_variable('fhldiv', fhldiv, 0.001D0, 10.0D0, &
'F-value for divertor heat load')
case ('hldiv')
call parse_real_variable('hldiv', hldiv, 0.0D0, 10.0D0, &
'Divertor heat load (MW/m2)')
case ('i_hldiv')
call parse_int_variable('i_hldiv', i_hldiv, 0, 2, &
'Switch for user input hldiv')
case ('fflutf')
call parse_real_variable('fflutf', fflutf, 0.001D0, 10.0D0, &
'F-value for neutron fluence on TF coil')
case ('ffuspow')
call parse_real_variable('ffuspow', ffuspow, 0.001D0, 10.0D0, &
'F-value for maximum fusion power')
case ('fiooic')
call parse_real_variable('fiooic', fiooic, 0.001D0, 10.0D0, &
'F-value for SCTF iop/icrit')
case ('fjprot')
call parse_real_variable('fjprot', fjprot, 0.001D0, 10.0D0, &
'F-value for SCTF winding pack J')
case ('flhthresh')
call parse_real_variable('flhthresh', flhthresh, 0.001D0, 1.0D6, &
'F-value for L-H power threshold')
case ('fmva')
call parse_real_variable('fmva', fmva, 0.001D0, 10.0D0, &
'F-value for maximum MVA')
case ('fnbshinef')
call parse_real_variable('fnbshinef', fnbshinef, 0.001D0, 10.0D0, &
'F-value for maximum NBI shine-through fraction')
case ('fncycle')
call parse_real_variable('fncycle', fncycle, 1.0D-8, 1.0D0, &
'F-value for minimum CS coil stress load cycles')
case ('fpeakb')
call parse_real_variable('fpeakb', fpeakb, 0.001D0, 10.0D0, &
'F-value for max toroidal field')
case ('fpinj')
call parse_real_variable('fpinj', fpinj, 0.001D0, 10.0D0, &
'F-value for injection power')
case ('fpnetel')
call parse_real_variable('fpnetel', fpnetel, 0.001D0, 10.0D0, &
'F-value for net electric power')
case ('fportsz')
call parse_real_variable('fportsz', fportsz, 0.001D0, 10.0D0, &
'F-value for port size')
case ('fpdivlim')
call parse_real_variable('fpdivlim', fpdivlim, 0.001D0, 1.0D0, &
'F-value for minimum pdivt')
case ('ftoroidalgap')
call parse_real_variable('ftoroidalgap', ftoroidalgap, 0.001D0, 10.0D0, &
'F-value for toroidal gap consistency')
case ('f_avspace')
call parse_real_variable('f_avspace', f_avspace, 0.001D0, 10.0D0, &
'F-value for radial build consistency (stellarators)')
case ('fpsepr')
call parse_real_variable('fpsepr', fpsepr, 0.001D0, 10.0D0, &
'F-value for Psep/R limit')
case ('fptemp')
call parse_real_variable('fptemp', fptemp, 0.001D0, 10.0D0, &
'F-value for peak centrepost temperature')
case ('fptfnuc')
call parse_real_variable('fptfnuc', fptfnuc, 0.001D0, 10.0D0, &
'F-value for max TF coil nuclear heating')
case ('fq')
call parse_real_variable('fq', fq, 0.001D0, 10.0D0, &
'F-value for edge safety factor')
case ('fqval')
call parse_real_variable('fqval', fqval, 0.001D0, 10.0D0, &
'F-value for fusion gain Q')
case ('fradpwr')
call parse_real_variable('fradpwr', fradpwr, 0.0D0, 1.0D0, &
'F-value for radiation power limit')
case ('fradwall')
call parse_real_variable('fradwall', fradwall, 0.001D0, 1.0D0, &
'f-value for upper limit on radiation wall load')
case ('freinke')
call parse_real_variable('freinke', freinke, 0.001D0, 1.0D0, &
'f-value for upper limit on Reinke detachment criterion')
case ('frminor')
call parse_real_variable('frminor', frminor, 0.001D0, 10.0D0, &
'F-value for minor radius limit')
case ('fstrcase')
call parse_real_variable('fstrcase', fstrcase, 0.001D0, 10.0D0, &
'F-value for TF coil case stress')
case ('fstrcond')
call parse_real_variable('fstrcond', fstrcond, 0.001D0, 10.0D0, &
'F-value for TF coil conduit stress')
case ('fstr_wp')
call parse_real_variable('fstr_wp', fstr_wp, 1.0D-9, 10.0D0, &
'F-value for TF coil strain absolute value')
case ('fmaxvvstress')
call parse_real_variable('fmaxvvstress', fmaxvvstress, 0.001D0, 1.0D0, &
'F-value for maximum permitted stress of the VV')
case ('ftbr')
call parse_real_variable('ftbr', ftbr, 0.001D0, 10.0D0, &
'F-value for tritium breeding ratio limit')
case ('ftburn')
call parse_real_variable('ftburn', ftburn, 0.001D0, 10.0D0, &
'F-value for burn time limit')
case ('ftcycl')
call parse_real_variable('ftcycl', ftcycl, 0.001D0, 10.0D0, &
'F-value for cycle time')
case ('ftmargtf')
call parse_real_variable('ftmargtf', ftmargtf, 0.001D0, 10.0D0, &
'F-value for TF coil temp. margin')
case ('ftmargoh')
call parse_real_variable('ftmargoh', ftmargoh, 0.001D0, 10.0D0, &
'F-value for TF coil temp. margin')
case ('ftohs')
call parse_real_variable('ftohs', ftohs, 0.001D0, 10.0D0, &
'F-value for plasma current ramp-up time')
case ('ftpeak')
call parse_real_variable('ftpeak', ftpeak, 0.001D0, 10.0D0, &
'F-value for peak first wall temperature')
case ('fvdump')
call parse_real_variable('fvdump', fvdump, 0.001D0, 10.0D0, &
'F-value for dump voltage')
case ('fvs')
call parse_real_variable('fvs', fvs, 0.001D0, 10.0D0, &
'F-value for startup V-s requirement')
case ('fvssu')
call parse_real_variable('fvssu', fvssu, 0.001D0, 10.0D0, &
'F-value for start up V-s requirement and availability equality')
case ('fvvhe')
call parse_real_variable('fvvhe', fvvhe, 0.001D0, 10.0D0, &
'F-value for VV He concentration limit')
case ('fwalld')
call parse_real_variable('fwalld', fwalld, 0.001D0, 10.0D0, &
'F-value for wall load limit')
case ('fzactual')
call parse_real_variable('fzactual', fzactual, 0.0D0, 1.0D0, &
'fraction of specified impurity in SOL when constrained by Reinke criteria')
case ('fzeffmax')
call parse_real_variable('fzeffmax', fzeffmax, 0.001D0, 1.0D0, &
'f-value for Zeff limit equation')
case ('fpoloidalpower')
call parse_real_variable('fpoloidalpower', fpoloidalpower, 0.001D0, 1.0D0, &
'f-value for constraint on rate of change of energy in poloidal field')
case ('fpsep')
call parse_real_variable('fpsep', fpsep, 0.001D0, 1.0D0, &
'f-value to ensure separatrix power is less than value from Kallen bach divertor')
case ('fpsepbqar')
call parse_real_variable('fpsepbqar', fpsepbqar, 0.001D0, 1.0D0, &
'f-value for TF coil quench temperature < tmax_croco (constraint equation 74)')
case ('fcqt')
call parse_real_variable('fcqt', fcqt, 0.001D0, 1.0D0, &
'TF coil quench temparature remains below tmax_croco')
case ('fne0')
call parse_real_variable('fne0', fne0, 0.001D0, 1.0D0, &
'Central electron temperature remains higher that the pedestal one')
case ('gammax')
call parse_real_variable('gammax', gammax, 0.01D0, 10.0D0, &
'Maximum current drive gamma (A/W-m2)')
case ('maxradwallload')
call parse_real_variable('maxradwallload', maxradwallload, 0.1D0, 10.0D0, &
'Maximum permitted radiation wall load (MW/m^2)')
case ('mvalim')
call parse_real_variable('mvalim', mvalim, 0.0D0, 1000.0D0, &
'Maximum MVA limit')
case ('nbshinefmax')
call parse_real_variable('nbshinefmax', nbshinefmax, 1.0D-20, 1.0D-1, &
'Maximum NB shine-through fraction')
case ('nflutfmax')
call parse_real_variable('nflutfmax', nflutfmax, 1.0D20, 1.0D24, &
'Max fast neutron fluence on TF coil (n/m2)')
case ('pdivtlim')
call parse_real_variable('pdivtlim', pdivtlim, 0.1D0, 1.0D3, &
'Minimum pdivt (MW) (con. 80, itvar. 153)')
case ('peakfactrad')
call parse_real_variable('peakfactrad', peakfactrad, 0.1D0, 10D0, &
'peaking factor for radiation wall load')
case ('pnetelin')
call parse_real_variable('pnetelin', pnetelin, 1.0D0, 1.0D4, &
'Required net electric power (MW)')
case ('powfmax')
call parse_real_variable('powfmax', powfmax, 1.0D0, 1.0D4, &
'Maximum fusion power (MW)')
case ('psepbqarmax')
call parse_real_variable('psepbqarmax', psepbqarmax, 1.0D0, 50.0D0, &
'Maximum Psep*Bt/q*A*R ratio (MW.T/m)')
case ('pseprmax')
call parse_real_variable('pseprmax', pseprmax, 1.0D0, 60.0D0, &
'Maximum Psep/R ratio (MW/m)')
case ('ptfnucmax')
call parse_real_variable('ptfnucmax', ptfnucmax, 1.0D-6, 1.0D0, &
'Maximum TF coil nuclear heating (MW/m3)')
case ('tbrmin')
call parse_real_variable('tbrmin', tbrmin, 0.001D0, 2.0D0, &
'Minimum tritium breeding ratio')
case ('tbrnmn')
call parse_real_variable('tbrnmn', tbrnmn, 1.0D-3, 1.0D6, &
'Minimum burn time (s)')
case ('tcycmn')
call parse_real_variable('tcycmn', tcycmn, 1.0D-3, 2.0D6, &
'Minimum cycle time (s)')
case ('vvhealw')
call parse_real_variable('vvhealw', vvhealw, 0.01D0, 10.0D0, &
'Allowable maximum He conc. in VV (appm)')
case ('walalw')
call parse_real_variable('walalw', walalw, 0.001D0, 50.0D0, &
'Allowable wall load (MW/m2)')
case ('zeffmax')
call parse_real_variable('zeffmax', zeffmax, 1.0D0, 10.0D0, &
'Allowable Zeff')
! Current drive settings
case ('beamwd')
call parse_real_variable('beamwd', beamwd, 0.001D0, 5.0D0, &
'Beam width (m)')
case ('bootstrap_current_fraction_max')
call parse_real_variable('bootstrap_current_fraction_max', bootstrap_current_fraction_max, -0.999D0, 0.999D0, &
'(-fixed)/maximum Bootstrap fraction')
case ('cboot')
call parse_real_variable('cboot', cboot, 0.0D0, 10.0D0, &
'Bootstrap current fraction multiplier')
case ('enbeam')
call parse_real_variable('enbeam', enbeam, 1.0D0, 1.0D6, &
'Neutral beam energy (keV)')
case ('etalh')
call parse_real_variable('etalh', etalh, 0.0D0, 1.0D0, &
'LH wall plug to plasma efficiency')
case ('etaech')
call parse_real_variable('etaech', etaech, 0.0D0, 1.0D0, &
'ECH wall plug to injector efficiency')
case ('etanbi')
call parse_real_variable('etanbi', etanbi, 0.0D0, 1.0D0, &
'NBI wall plug to injector efficiency')
case ('feffcd')
call parse_real_variable('feffcd', feffcd, 0.0D0, 20.0D0, &
'Current drive efficiency fiddle factor')
case ('forbitloss')
call parse_real_variable('forbitloss', forbitloss, 0.0D0, 0.999D0, &
'NBI power orbit loss fraction')
case ('frbeam')
call parse_real_variable('frbeam', frbeam, 0.5D0, 2.0D0, &
'R_tan / R_major for NBI')
case ('ftritbm')
call parse_real_variable('ftritbm', ftritbm, 0.0D0, 1.0D0, &
'Tritium fraction of beam')
case ('gamma_ecrh')
call parse_real_variable('gamma_ecrh', gamma_ecrh, 0.0D0, 1.0D0, &
'User input ECRH gamma_CD')
case ('harnum')
call parse_real_variable('harnum', harnum, 1.0D0, 10.0D0, &
'Cyclotron harmonic frequency number')
case ('wave_mode')
call parse_int_variable('wave_mode', wave_mode, 0, 1, &
'Cyclotron wave mode switch')
case ('xi_ebw')
call parse_real_variable('xi_ebw', xi_ebw, 0.0D0, 1.0D0, &
'User input EBW scaling for Plasma Heating')
case ('iefrf')
call parse_int_variable('iefrf', iefrf, 1, 13, &
'Switch for curr drive efficiency model')
case ('iefrffix')
call parse_int_variable('iefrffix', iefrffix, 0, 13, &
'Switch for 2nd curr drive efficiency model')
case ('irfcd')
call parse_int_variable('irfcd', irfcd, 0, 1, &
'Switch for current drive calculation')
case ('nbshield')
call parse_real_variable('nbshield', nbshield, 0.01D0, 0.5D0, &
'Wall thickness of neutral beam duct (m)')
case ('pheat')
call parse_real_variable('pheat', pheat, 0.0D0, 1.0D3, &
'Heating power not used for C.D. (MW)')
case ('pheatfix')
call parse_real_variable('pheatfix', pheatfix, 0.0D0, 1.0D3, &
'Secondary fixed heating power not used for C.D. (MW)')
case ('pinjalw')
call parse_real_variable('pinjalw', pinjalw, 0.0D0, 1.0D3, &
'Maximum allowed injection power (MW)')
case ('pinjfixmw')
call parse_real_variable('pinjfixmw', pinjfixmw, 0.0D0, 1.0D3, &
'Secondary auxiliary injection power (MW)')
case ('tbeamin')
call parse_real_variable('tbeamin', tbeamin, 0.0D0, 10.0D0, &
'No of NB decay lengths to plas centre')
! Time settings
case ('tburn')
call parse_real_variable('tburn', tburn, 0.0D0, 1.0D8, &
'Burn time (s)')
case ('tdwell')
call parse_real_variable('tdwell', tdwell, 0.0D0, 1.0D8, &
'Time between burns (s)')
case ('t_fusion_ramp')
call parse_real_variable('t_fusion_ramp', t_fusion_ramp, 0.0D0, 1.0D4, &
'Heating time after current ramp (s)')
case ('tohs')
call parse_real_variable('tohs', tohs, 0.0D0, 1.0D4, &
'Plasma current ramp-up time for current init (s)')
case ('tohsin')
call parse_real_variable('tohsin', tohsin, 0.0D0, 1.0D4, &
'Switch for TOHS calculation')
case ('tqnch')
call parse_real_variable('tqnch', tqnch, 0.0D0, 1.0D4, &
'PF coil shutdown time (s)')
case ('tramp')
call parse_real_variable('tramp', tramp, 0.0D0, 1.0D4, &
'Initial charge time for PF coils (s)')
case ('pulsetimings')
call parse_real_variable('pulsetimings', pulsetimings, 0.0D0, 1.0D0, &
'Pulse timings switch for lpulse=1')
! Divertor settings: 2016 Kallenbach model (2016/07/04)
! See HTS coil module for PROCESS.docx
!case ('cable_helium_fraction')
! call parse_real_variable('cable_helium_fraction', cable_helium_fraction, 0.215D0, 0.99D0, &
! 'Helium area as a fraction of the cable space.')
! Divertor settings
case ('anginc')
call parse_real_variable('anginc', anginc, 0.0D0, 1.5707D0, &
'Field line ang of incid on dvrtr (rad)')
case ('beta_div')
call parse_real_variable('beta_div', beta_div, 0.0D0, 360.0D0, &
'Field line angle wrt divertor target plate (degrees)')
case ('betai')
call parse_real_variable('betai', betai, 0.0D0, 1.5707D0, &
'Poloidal plane angle between inner divertor leg and plate (rad)')
case ('betao')
call parse_real_variable('betao', betao, 0.0D0, 1.5707D0, &
'Poloidal plane angle between outer divertor leg and plate (rad)')
case ('bpsout')
call parse_real_variable('bpsout', bpsout, 0.0D0, 10.0D0, &
'Ref B_p at outboard divertor strike point')
case ('c1div')
call parse_real_variable('c1div', c1div, -100.0D0, 100.0D0, &
'Divertor model fitting coefficient')
case ('c2div')
call parse_real_variable('c2div', c2div, -100.0D0, 100.0D0, &
'Divertor model fitting coefficient')
case ('c3div')
call parse_real_variable('c3div', c3div, -100.0D0, 100.0D0, &
'Divertor model fitting coefficient')
case ('c4div')
call parse_real_variable('c4div', c4div, -100.0D0, 100.0D0, &
'Divertor model fitting coefficient')
case ('c5div')
call parse_real_variable('c5div', c5div, -100.0D0, 100.0D0, &
'Divertor model fitting coefficient')
case ('c6div')
call parse_real_variable('c6div', c6div, -100.0D0, 100.0D0, &
'Divertor model fitting coefficient')
case ('delld')
call parse_real_variable('delld', delld, 0.1D0, 2.0D0, &
'Coefficient for power distribution')
case ('divclfr')
call parse_real_variable('divclfr', divclfr, 0.0D0, 1.0D0, &
'Divertor coolant fraction')
case ('divdens')
call parse_real_variable('divdens', divdens, 0.1D0, 1.0D5, &
'Divertor structure density (kg/m3)')
case ('divdum')
call parse_int_variable('divdum', divdum, 0, 1, &
'Switch for divertor Zeff value')
case ('divfix')
call parse_real_variable('divfix', divfix, 0.1D0, 5.0D0, &
'Divertor structure vertical extent (m)')
case ('divplt')
call parse_real_variable('divplt', divplt, 0.01D0, 1.0D0, &
'Divertor plate thickness (m)')
case ('fdfs')
call parse_real_variable('fdfs', fdfs, 0.0D0, 20.0D0, &
'Radial gradient ratio')
case ('fdiva')
call parse_real_variable('fdiva', fdiva, 0.1D0, 2.0D0, &
'Divertor area fiddle factor')
case ('fififi')
call parse_real_variable('fififi', fififi, 1.0D-6, 1.0D0, &
'Coefficient for gamdiv')
case ('flux_exp')
call parse_real_variable('flux_exp', flux_exp, 0.0D0, 10.0D0, &
'Plasma flux expansion in the divertor')
case ('frrp')
call parse_real_variable('frrp', frrp, 0.0D0, 1.0D0, &
'Fraction of radiated power to plate')
case ('hldivlim')
call parse_real_variable('hldivlim', hldivlim, 0.1D0, 20.0D0, &
'Divertor heat load limit (MW/m2)')
case ('ksic')
call parse_real_variable('ksic', ksic, 0.0D0, 2.0D0, &
'Divertor power fraction thingy')
case ('omegan')
call parse_real_variable('omegan', omegan, 0.1D0, 10.0D0, &
'Pressure ratio (nT)_p / (nT)_s')
case ('plleni')
call parse_real_variable('plleni', plleni, 0.1D0, 10.0D0, &
'Poloidal length, inboard divertor plate (m)')
case ('plleno')
call parse_real_variable('plleno', plleno, 0.1D0, 10.0D0, &
'Poloidal length, outboard divertor plate (m)')
case ('plsepi')
call parse_real_variable('plsepi', plsepi, 0.1D0, 10.0D0, &
'Poloidal length, x to inboard strike point (m)')
case ('plsepo')
call parse_real_variable('plsepo', plsepo, 0.1D0, 10.0D0, &
'Poloidal length, x to outboard strike point (m)')
case ('prn1')
call parse_real_variable('prn1', prn1, 0.0D0, 1.0D0, &
'n_scrapeoff / n_average plasma')
case ('rlenmax')
call parse_real_variable('rlenmax', rlenmax, 0.0D0, 1.0D0, &
'Maximum value for length ratio')
case ('tdiv')
call parse_real_variable('tdiv', tdiv, 0.1D0, 100.0D0, &
'Plasma temperature at divertor (eV)')
case ('xparain')
call parse_real_variable('xparain', xparain, 0.01D0, 1.0D4, &
'Parallel heat transport coeff (m2/s)')
case ('xpertin')
call parse_real_variable('xpertin', xpertin, 0.0D0, 10.0D0, &
'Perpendicular heat trans coeff (m2/s)')
case ('zeffdiv')
call parse_real_variable('zeffdiv', zeffdiv, 0.01D0, 100.0D0, &
'Zeff in the divertor region (if divdum.ne.0)')
! Radial / vertical build settings
case ('aplasmin')
call parse_real_variable('aplasmin', aplasmin, 0.01D0, 10.0D0, &
'Minimum minor radius (m)')
case ('blbmith')
call parse_real_variable('blbmith', blbmith, 0.0D0, 2.0D0, &
'Inboard blanket box manifold thickness (m)')
case ('blbmoth')
call parse_real_variable('blbmoth', blbmoth, 0.0D0, 2.0D0, &
'Outboard blanket box manifold thickness (m)')
case ('blbpith')
call parse_real_variable('blbpith', blbpith, 0.0D0, 2.0D0, &
'Inboard blanket back plate thickness (m)')
case ('blbpoth')
call parse_real_variable('blbpoth', blbpoth, 0.0D0, 2.0D0, &
'Outboard blanket back plate thickness (m)')
case ('blbuith')
call parse_real_variable('blbuith', blbuith, 0.0D0, 2.0D0, &
'Inboard blanket breeding unit thickness (m)')
case ('blbuoth')
call parse_real_variable('blbuoth', blbuoth, 0.0D0, 2.0D0, &
'Outboard blanket breeding unit thickness (m)')
case ('blnkith')
if (iblanket == 3) then
!CCFE HCPB model with Tritium Breeding Ratio calculation
write(outfile,*) '**********'
write(outfile,*) 'ERROR. BLNKITH input is not required for CCFE HCPB model with Tritium Breeding Ratio calculation -'
write(outfile,*) 'please remove it from the input file'
write(outfile,*) '**********'
else
call parse_real_variable('blnkith', blnkith, 0.0D0, 10.0D0, &
'Inboard blanket thickness (m)')
! Inboard blanket does not exist if the thickness is below a certain limit.
if(blnkith>=0.0D00.and.blnkith<=1.0D-3) then
blnkith = 0.0D00 ! Inboard blanket thickness is zero
iblnkith = 0 ! Inboard blanket does not exist
end if
end if
case ('blnkoth')
if (iblanket == 3) then
!CCFE HCPB model with Tritium Breeding Ratio calculation
write(outfile,*) '**********'
write(outfile,*) 'ERROR. BLNKOTH input is not required for CCFE HCPB model with Tritium Breeding Ratio calculation -'
write(outfile,*) 'please remove it from the input file'
write(outfile,*) '**********'
else
call parse_real_variable('blnkoth', blnkoth, 0.0D0, 10.0D0, &
'Outboard blanket thickness (m)')
end if
case ('bore')
call parse_real_variable('bore', bore, 0.0D0, 50.0D0, &
'Machine bore (m)')
case ('clhsf')
call parse_real_variable('clhsf', clhsf, 2.0D0, 10.0D0, &
'Cryostat lid height scaling factor (m)')
case ('ddwex')
call parse_real_variable('ddwex', ddwex, 0.0D0, 10.0D0, &
'cryostat wall thickness (m)')
case ('d_vv_in')
call parse_real_variable('d_vv_in', d_vv_in, 0.0D0, 10.0D0, &
'Inboard vacuum vessel thickness (m)')
case ('d_vv_out')
call parse_real_variable('d_vv_out', d_vv_out, 0.0D0, 10.0D0, &
'Outboard vacuum vessel thickness (m)')
case ('d_vv_top')
call parse_real_variable('d_vv_top', d_vv_top, 0.0D0, 10.0D0, &
'Topside vacuum vessel thickness (m)')
case ('d_vv_bot')
call parse_real_variable('d_vv_bot', d_vv_bot, 0.0D0, 10.0D0, &
'Underside vacuum vessel thickness (m)')
case ('fcspc')
call parse_real_variable('fcspc', fcspc, 0.0D0, 1.0D0, &
'Fraction of space occupied by CS pre-comp structure')
case ('fseppc')
call parse_real_variable('fseppc', fseppc, 1.0D6, 1.0D9, &
'CS separation force held by CS pre-comp structure')
case ('oh_steel_frac')
call parse_real_variable('oh_steel_frac', oh_steel_frac, 1.0D-3, 0.999D0, &
'Central solenoid steel fraction')
case ('foh_stress')
call parse_real_variable('foh_stress', foh_stress, 1.0D-3, 1.0D0, &
'F-value for CS coil Tresca yield criterion')
! case ('fwith')
! call parse_real_variable('fwith', fwith, 0.0D0, 10.0D0, &
! 'Inboard first wall thickness, initial estimate (m)')
! case ('fwoth')
! call parse_real_variable('fwoth', fwoth, 0.0D0, 10.0D0, &
! 'Outboard first wall thickness, initial estimate (m)')
case ('gapoh')
call parse_real_variable('gapoh', gapoh, 0.0D0, 10.0D0, &
'Gap between OHC and TF coil (m)')
case ('gapds')
call parse_real_variable('gapds', gapds, 0.0D0, 10.0D0, &
'Gap between inboard vacuum vessel and shield (m)')
case ('gapomin')
call parse_real_variable('gapomin', gapomin, 0.0D0, 10.0D0, &
'Min gap between outboard shield & vac vessel (m)')
case ('iohcl')
call parse_int_variable('iohcl', iohcl, 0, 1, &
'Switch for existence of Central Solenoid')
case ('iprecomp')
call parse_int_variable('iprecomp', iprecomp, 0, 1, &
'Switch for existence of Central Solenoid pre-compression structure')
case ('tf_in_cs')
call parse_int_variable('tf_in_cs', tf_in_cs, 0, 1, &
'Switch for placing TF coils inside of the CS')
case ('ohcth')
call parse_real_variable('ohcth', ohcth, 0.0D0, 10.0D0, &
'Central Solenoid thickness (m)')
case ('rinboard')
call parse_real_variable('rinboard', rinboard, 0.1D0, 10.0D0, &
'Plasma inboard radius (m)')
case ('rpf2dewar')
call parse_real_variable('rpf2dewar', rpf2dewar, 0.1D0, 5.0D0, &
'Outer PF coil to cryostat distance (m)')
case ('i_r_cp_top')
call parse_int_variable('i_r_cp_top', i_r_cp_top, 0, 2, &
'Switch selecting the parametrization of the TF CP top radius (ST only)')
case ('r_cp_top')
call parse_real_variable('r_cp_top', r_cp_top, 0.0010D0, 10.0D0, &
'Top CP outer radius (ST only) (m)')
case ('f_r_cp')
call parse_real_variable('f_r_cp', f_r_cp, 1.0D0, 100.0D0, &
'Ratio between the top and the midplane TF CP outer radius (-) ')
case ('scrapli')
call parse_real_variable('scrapli', scrapli, 0.0D0, 10.0D0, &
'Inboard scrapeoff length (m)')
case ('scraplo')
call parse_real_variable('scraplo', scraplo, 0.0D0, 10.0D0, &
'Outboard scrapeoff length (m)')
case ('shldith')
call parse_real_variable('shldith', shldith, 0.0D0, 10.0D0, &
'Inboard shield thickness (m)')
case ('shldlth')
call parse_real_variable('shldlth', shldlth, 0.0D0, 10.0D0, &
'Lower (divertor) shield thickness (m)')
case ('shldoth')
call parse_real_variable('shldoth', shldoth, 0.0D0, 10.0D0, &
'Outboard shield thickness (m)')
case ('shldtth')
call parse_real_variable('shldtth', shldtth, 0.0D0, 10.0D0, &
'Top shield thickness (m)')
case ('sigallpc')
call parse_real_variable('sigallpc', sigallpc, 0.0D1, 1.0D9, &
'Allowable stress in CS pre-comp structure (Pa)')
! Issue #514 Make tfcth an output not an input or iteration variable:
! Eventually this input will be removed.
case ('tfcth')
call parse_real_variable('tfcth', tfcth, 0.0D0, 10.0D0, &
'TF coil thickness (m)')
case ('dr_tf_wp')
call parse_real_variable('dr_tf_wp', dr_tf_wp, 0.0D0, 10.0D0, &
'TF coil winding pack radial thickness (m)')
case ('tfootfi')
call parse_real_variable('tfootfi', tfootfi, 0.2D0, 5.0D0, &
'TFC outboard/inboard leg thickness')
case ('tftsgap')
call parse_real_variable('tftsgap', tftsgap, 0.0D0, 5.0D0, &
'Minimum gap between TF and thermal shield for manufacturing etc. (m)')
case ('thshield_ib')
call parse_real_variable('thshield_ib', thshield_ib, 0.0D0, 10.0D0, &
'TF/VV thermal shield thickness, inboard (m)')
case ('thshield_ob')
call parse_real_variable('thshield_ob', thshield_ob, 0.0D0, 10.0D0, &
'TF/VV thermal shield thickness, outboard (m)')
case ('thshield_vb')
call parse_real_variable('thshield_vb', thshield_vb, 0.0D0, 10.0D0, &
'TF/VV thermal shield thickness, vertical build (m)')
case ('vgap_xpoint_divertor')
call parse_real_variable('vgap_xpoint_divertor', vgap_xpoint_divertor, 0.0D0, 10.0D0, &
'Vert gap between x-pnt and divertor (m)')
case ('vgap_vv_thermalshield')
call parse_real_variable('vgap_vv_thermalshield', vgap_vv_thermalshield, 0.0D0, 10.0D0, &
'Vert gap between TF coil and shield (m)')
case ('vgaptop')
call parse_real_variable('vgaptop', vgaptop, 0.0D0, 10.0D0, &
'Top vert gap between plasma and first wall (m)')
case ('vvblgap')
call parse_real_variable('vvblgap', vvblgap, 0.0D0, 5.0D0, &
'Gap between vacuum vessel and blanket (m)')
! TF coil settings
case ('bcritsc')
call parse_real_variable('bcritsc', bcritsc, 10.0D0, 50.0D0, &
'Critical field for superconductor')
case ('tape_width')
call parse_real_variable('tape_width', tape_width, 0.0D0, 0.1D0, &
'Mean width of HTS tape (m)')
case ('tape_thickness')
call parse_real_variable('tape_thickness', tape_thickness, 0.0D0, 0.1D0, &
'Thickness of HTS tape (m)')
case ('rebco_thickness')
call parse_real_variable('rebco_thickness', rebco_thickness, 0.01D-6, 100.0D-6, &
'Thickness of REBCO layer in HTS tape (m)')
if (rebco_thickness > 1.0D-6) then
! Warning includes concerns raised on Issue #1494
write(outfile,*) ' '
write(outfile,*) '**********'
write(outfile,*) 'WARNING: the relationship between REBCO layer thickness and current density is not linear.'
write(outfile,*) 'REBCO layer thicknesses > 1um should be considered an aggressive extrapolation of'
write(outfile,*) 'current HTS technology and any results must be considered speculative.'
write(outfile,*) '**********'
write(outfile,*) ' '
end if
case ('hastelloy_thickness')
call parse_real_variable('hastelloy_thickness', hastelloy_thickness, 0.01D-6, 1000.0D-6, &
'Thickness of Hastelloy layer in HTS tape (m)')
! case ('croco_id')
! call parse_real_variable('croco_id', croco_id, 0.0D0, 0.1D0, &
! 'croco_id')
! case ('croco_od')
! call parse_real_variable('croco_od', croco_od, 0.0D0, 0.1D0, &
! 'Outer diameter of CroCo strand (m)')
case ('croco_thick')
call parse_real_variable('croco_thick', croco_thick, 0.001D0, 0.1D0, &
'Thickness of CroCo copper tube (m)')
case ('copper_thick')
call parse_real_variable('copper_thick', copper_thick, 0.0D0, 1000.0D-6, &
'copper_thick (m)')
! case ('copper_bar')
! call parse_real_variable('copper_bar', copper_bar, 0.0D0, 0.9D0, &
! 'area of central copper bar, as a fraction of area inside the jacket')
case ('copper_rrr')
call parse_real_variable('copper_rrr', copper_rrr, 1.0D0, 1.0D4, &
'residual resistivity ratio copper in TF superconducting cable')
case ('coppera_m2_max')
call parse_real_variable('coppera_m2_max', copperA_m2_max, 1.0D6, 1.0D10, &
'Maximum TF coil current / copper area (A/m2)')
case ('f_coppera_m2')
call parse_real_variable('f_coppera_m2', f_coppera_m2, 1.0D-3, 1.0D1, &
'f-value for constraint 75: TF coil current / copper area < copperA_m2_max')
case ('casthi')
call parse_real_variable('casthi', casthi, 0.0D0, 1.0D0, &
'TF coil case inner thickness (m)')
! OR
case ('casthi_fraction')
call parse_real_variable('casthi_fraction', casthi_fraction, 0.0D0, 1.0D0, &
'inboard TF coil case plasma side thickness as a fraction of tfcth')
! Use EITHER
case ('casths')
call parse_real_variable('casths', casths, 0.0D0, 1.0D0, &
'TF coil case sidewall thickness (m)')
! OR
case ('casths_fraction')
call parse_real_variable('casths_fraction', casths_fraction, 0.0D0, 1.0D0, &
'inboard TF coil sidewall case thickness as a fraction of tftort')
case ('cpttf')
call parse_real_variable('cpttf', cpttf, 0.001D0, 1.0D6, &
'TF coil leg current per turn (A)')
case ('cpttf_max')
call parse_real_variable('cpttf_max', cpttf_max, 1.0D0, 1.0D6, &
'Maximum allowable TF coil leg current per turn (A) (constraint equation 77)')
case ('sig_tf_case_max')
call parse_real_variable('sig_tf_case_max', sig_tf_case_max, 1.0D6, 1.0D11, &
'Allowable maximum shear stress in TF coil case (Tresca criterion) (Pa)')
case ('sig_tf_wp_max')
call parse_real_variable('sig_tf_wp_max', sig_tf_wp_max, 1.0D6, 1.0D11, &
'Allowable maximum shear stress in TF coil conduit (Tresca criterion) (Pa)')
case ('dcase')
call parse_real_variable('dcase', dcase, 1.0D3, 1.0D5, &
'Density of TF coil case (kg/m3)')
case ('dcond')
call parse_real_array('dcond', dcond, isub1, 9, &
'TF/PF coil superconductor density (kg/m3)', icode)
case ('dcondins')
call parse_real_variable('dcondins', dcondins, 5.0D2, 1.0D4, &
'Density of TF coil insulation (kg/m3)')
case ('dcopper')
call parse_real_variable('dcopper', dcopper, 8.0D3, 1.0D4, &
'Density of copper (kg/m3)')
case ('dalu')
call parse_real_variable('dalu', dalu, 2.5D3, 3.0D4, &
'Density of Alumium (kg/m3)')
case ('dhecoil')
call parse_real_variable('dhecoil', dhecoil, 0.0d0, 0.1d0, &
'Diameter of He coil in TF winding (m)')
case ('drtop')
call parse_real_variable('drtop', drtop, -1.5D0, 1.5D0, &
'ST CP top radius adjust (m)')
case ('dztop')
call parse_real_variable('dztop', dztop, -0.5D0, 0.5D0, &
'ST CP taper height adjust (m)')
case ('etapump')
call parse_real_variable('etapump', etapump, 0.0D0, 1.0D0, &
'Efficiency of c/p coolant pump')
case ('eyoung_steel')
call parse_real_variable('eyoung_steel', eyoung_steel, 1.0D8, 1.0D13, &
'Steel case Youngs Modulus (Pa)')
case ('eyoung_ins')
call parse_real_variable('eyoung_ins', eyoung_ins, 1.0D8, 1.0D13, &
'Insulator Youngs Modulus (Pa)')
case ('eyoung_cond_axial')
call parse_real_variable('eyoung_cond_axial', eyoung_cond_axial, 0.0D0, 1.0D13, &
'SC TF coil Youngs Modulus, axial (Pa)')
case ('eyoung_cond_trans')
call parse_real_variable('eyoung_cond_trans', eyoung_cond_trans, 0.0D0, 1.0D13, &
'SC TF coil Youngs Modulus, transverse (Pa)')
case ('eyoung_al')
call parse_real_variable('eyoung_al', eyoung_al, 0.0D0, 1.0D0, &
'Reinforced aluminium Young modulus for TF stress calc.')
case ('eyoung_res_tf_buck')
call parse_real_variable('eyoung_res_tf_buck', eyoung_res_tf_buck, 1.0D-10, 1.0D12, &
'Reinforced aluminium Young modulus for TF stress calc.')
case ('t_crit_nbti')
call parse_real_variable('t_crit_nbti ', t_crit_nbti , 0.0D0, 15.0D0, &
'Critical temperature of GL_nbti ')
case ('b_crit_upper_nbti')
call parse_real_variable('b_crit_upper_nbti', b_crit_upper_nbti, 0.0D0, 30.0D0, &
'Upper critical field of GL_nbti ')
case ('fcoolcp')
call parse_real_variable('fcoolcp', fcoolcp, 0.0D0, 1.0D0, &
'Coolant fraction of TF centrepost (itart=1) or the whole magnet (itart=0)')
case ('fcoolleg')
call parse_real_variable('fcoolleg', fcoolleg, 0.0D0, 1.0D0, &
'Coolant fraction of TF outboard leg (itart=1 only)')
case ('fcutfsu')
call parse_real_variable('fcutfsu', fcutfsu, 0.0D0, 1.0D0, &
'Cu fraction of SCTF cable conductor')
case ('fhts')
call parse_real_variable('fhts', fhts, 0.01D0, 1.0D0, &
'Technology adjustment factor for Bi-2212 HTS')
case ('frhocp')
call parse_real_variable('frhocp', frhocp, 0.01D0, 5.0D0, &
'Centrepost (itart=1) or global (itart=0) resistivity enhancement factor')
case ('frholeg')
call parse_real_variable('frholeg', frholeg, 0.01D0, 5.0D0, &
'TART outboard leg resistivity enhancement factor')
case ('rho_tf_joints')
call parse_real_variable('rho_tf_joints', rho_tf_joints, 0.0D0, 1.0D-2, &
'TF joints surfacic resistivity')
case ('i_cp_joints')
call parse_int_variable('i_cp_joints', i_cp_joints, 0, 1, &
'Switch for CP demoutable joints type')
case ('th_joint_contact')
call parse_real_variable('th_joint_contact', th_joint_contact, 0.0D0, 1.0D0, &
'TF sliding joints contact pad width')
case ('n_tf_joints_contact')
call parse_int_variable('n_tf_joints_contact', n_tf_joints_contact, 1, 50, &
'Number of contact per sliding joint')
case ('n_tf_joints')
call parse_int_variable('n_tf_joints', n_tf_joints, 1, 50, &
'Number of joints per turn')
case ('eff_tf_cryo')
call parse_real_variable('eff_tf_cryo', eff_tf_cryo, 0.0D0, 1.0D0, &
'TF coil cryo-plane efficiency')
case ('i_tf_stress_model')
call parse_int_variable('i_tf_stress_model', i_tf_stress_model, 0, 2, &
'Switch for the TF stress model')
case ('i_tf_tresca')
call parse_int_variable('i_tf_tresca', i_tf_tresca, 0, 1, &
'Switch for TF coil Tresca criterion')
case ('i_tf_wp_geom')
call parse_int_variable('i_tf_wp_geom', i_tf_wp_geom, 0, 2, &
'Switch for TF WP geometry selection')
case ('i_tf_case_geom')
call parse_int_variable('i_tf_case_geom', i_tf_case_geom, 0, 1, &
'Switch for TF case geometry selection')
case ('i_tf_turns_integer')
call parse_int_variable('i_tf_turns_integer', i_tf_turns_integer, 0, 1, &
'Switch for TF coil integer/non-integer turns')
case ('i_tf_bucking')
call parse_int_variable('i_tf_bucking', i_tf_bucking, 0, 3, &
'Switch for bucking cylinder (case)')
case ('i_tf_sc_mat')
call parse_int_variable('i_tf_sc_mat', i_tf_sc_mat, 1, 9, &
'TF coil superconductor material')
if (i_tf_sc_mat == 2) then
write(outfile,*) ' '
write(outfile,*) '**********'
write(outfile,*) 'Warning if you are using an old input file:'
write(outfile,*) 'i_tf_sc_mat=2 usage has changed -'
write(outfile,*) 'please check validity!'
write(outfile,*) '**********'
write(outfile,*) ' '
end if
case ('i_tf_sup')
call parse_int_variable('i_tf_sup', i_tf_sup, 0, 2, &
'Switch for TF coil type')
case ('i_tf_shape')
call parse_int_variable('i_tf_shape', i_tf_shape, 0, 2, &
'Switch for TF coil shape')
case ('i_tf_cond_eyoung_axial')
call parse_int_variable('i_tf_cond_eyoung_axial', i_tf_cond_eyoung_axial, 0, 2, &
'Switch for the behavior of the TF coil conductor elastic axial properties')
case ('i_tf_cond_eyoung_trans')
call parse_int_variable('i_tf_cond_eyoung_trans', i_tf_cond_eyoung_trans, 0, 1, &
'Switch for the TF coil conductor transverse behavior')
case ('i_str_wp')
call parse_int_variable('i_str_wp', i_str_wp, 0, 1, &
'Switch for the TF coil strain behavior')
case ('jbus')
call parse_real_variable('jbus', jbus, 1.0D4, 1.0D8, &
'TF coil bus current density (A/m2)')
case ('n_pancake')
call parse_int_variable('n_pancake', n_pancake, 1, 100, &
'Number of pancakes in TF coil (i_tf_turns_integer=1)')
case ('n_layer')
call parse_int_variable('n_layer', n_layer, 1, 100, &
'Number of layers in TF coil (i_tf_turns_integer=1)')
case ('n_tf_graded_layers')
call parse_int_variable('n_tf_graded_layers', n_tf_graded_layers, 1, 20, &
'Number of layers of different stress properties in the WP')
case ('n_rad_per_layer')
call parse_int_variable('n_rad_per_layer', n_rad_per_layer, 1, 500, &
'Size of the arrays per layers storing the radial dependent stress ')
case ('oacdcp')
call parse_real_variable('oacdcp', oacdcp, 1.0D4, 1.0D9, &
'Overall J in inboard TF coil midplane')
case ('poisson_steel')
call parse_real_variable('poisson_steel', poisson_steel, 0.0D0, 1.0D0, &
'Steel Poissons ratio for TF stress calc.')
case ('poisson_copper')
call parse_real_variable('poisson_copper', poisson_copper, 0.0D0, 1.0D0, &
'Steel Poissons ratio for TF stress calc.')
case ('poisson_al')
call parse_real_variable('poisson_al', poisson_al, 0.0D0, 1.0D0, &
'Aluminium Poissons ratio for TF stress calc.')
case ('ptempalw')
call parse_real_variable('ptempalw', ptempalw, 4.0D0, 573.15D0, &
'Maximum peak centrepost temp. (K)')
case ('rcool')
call parse_real_variable('rcool', rcool, 1.0D-6, 1.0D0, &
'Centrepost coolant channel radius')
case ('ripmax')
call parse_real_variable('ripmax', ripmax, 0.1D0, 100.0D0, &
'Max allowed ripple ampl. at plasma edge (%)')
case ('theta1_coil')
call parse_real_variable('theta1_coil', theta1_coil, 1.0D-1, 6.0D1, &
'The angle of the outboard arc forming the TF coil current center line (deg)')
case ('theta1_vv')
call parse_real_variable('theta1_vv', theta1_vv, 1.0D-1, 6.0D1, &
'The angle of the outboard arc forming the VV current center line (deg)')
case ('max_vv_stress')
call parse_real_variable('max_vv_stress', max_vv_stress, 0.1D6, 500.0D6, &
'The maximum shear stress that the Vacuum Vessel should experience (Pa)')
case ('str_cs_con_res')
call parse_real_variable('str_cs_con_res', str_cs_con_res, -0.02D0, 0.02D0, &
'Residual manufacturing strain in CS superconductor material')
case ('str_pf_con_res')
call parse_real_variable('str_pf_con_res', str_pf_con_res, -0.02D0, 0.02D0, &
'Residual manufacturing strain in PF superconductor material')
case ('str_tf_con_res')
call parse_real_variable('str_tf_con_res', str_tf_con_res, -0.02D0, 0.02D0, &
'Residual manufacturing strain in TF superconductor material')
case ('str_wp_max')
call parse_real_variable('str_wp_max', str_wp_max, 0.0D0, 0.3D0, &
'Maximum allowed absolute value of the strain in the TF coil')
case ('tcoolin')
call parse_real_variable('tcoolin', tcoolin, 4.0D0, 373.15D0, &
'Centrepost coolant inlet temperature (K)')
case ('tcpav')
call parse_real_variable('tcpav', tcpav, 4.0D0, 573.15D0, &
'Average centrepost coolant temperature (K)')
case ('tcritsc')
call parse_real_variable('tcritsc', tcritsc, 1.0D0, 300.0D0, &
'Critical temperature for superconductor')
case ('tdmptf')
call parse_real_variable('tdmptf', tdmptf, 0.1D0, 100.0D0, &
'Dump time for TF coil (s)')
case ('tfinsgap')
call parse_real_variable('tfinsgap', tfinsgap, 1.0D-10, 1.0D-1, &
'TF coil WP insertion gap (m)')
case ('rhotfbus')
call parse_real_variable('rhotfbus', rhotfbus, 0.0D0, 1.0D-5, &
'TF coil bus (feeders) resistivity (ohm-m)')
case ('n_tf')
call parse_real_variable('n_tf', n_tf, 0.0D0, 100.0D0, &
'Number of TF coils')
case ('n_tf_turn')
call parse_real_variable('n_tf_turn', n_tf_turn, 0.0D0, 100.0D0, &
'number of turns per TF coil')
case ('tftmp')
call parse_real_variable('tftmp', tftmp, 0.01D0, 293.0D0, &
'Peak TF coil He coolant temp. (K)')
case ('t_turn_tf')
call parse_real_variable('t_turn_tf', t_turn_tf, 0.0D0, 0.1D0, &
'TF turn square dimensions (m)')
case ('f_t_turn_tf')
call parse_real_variable('f_t_turn_tf', f_t_turn_tf, 0.0D0, 1.D0, &
'f-value for TF coils WP trurn squared dimension constraint')
case ('t_turn_tf_max')
call parse_real_variable('t_turn_tf_max', t_turn_tf_max, 0.0D0, 1.D0, &
'TF coils WP turn squared dimension upper limit (m)')
case ('t_cable_tf')
call parse_real_variable('t_cable_tf', t_cable_tf, 0.0D0, 0.1D0, &
'TF coil cable square/rounded dimensions (m)')
case ('thicndut')
call parse_real_variable('thicndut', thicndut, 0.0D0, 0.1D0, &
'Conduit insulation thickness (m)')
case ('layer_ins')
call parse_real_variable('layer_ins', layer_ins, 0.0D0, 0.1D0, &
'Additional insulation thickness between layers (m)')
case ('thkcas')
call parse_real_variable('thkcas', thkcas, 0.0D0, 1.0D0, &
'External supercond. case thickness (m)')
case ('thwcndut')
call parse_real_variable('thwcndut', thwcndut, 0.0D0, 0.1D0, &
'TF coil conduit case thickness (m)')
case ('tinstf')
call parse_real_variable('tinstf', tinstf, 0.0D0, 0.1D0, &
'Ground wall insulation thickness (m)')
case ('tmargmin_tf')
call parse_real_variable('tmargmin_tf', tmargmin_tf, 0.0D0, 20.0D0, &
'Minimum allowable temp margin: TF coil (K)')
case ('tmargmin_cs')
call parse_real_variable('tmargmin_cs', tmargmin_cs, 0.0D0, 20.0D0, &
'Minimum allowable temp margin: CS (K)')
case ('tmargmin')
call parse_real_variable('tmargmin', tmargmin, 0.0D0, 20.0D0, &
'Minimum allowable temp margin: TFC AND CS (K)')
case ('tmaxpro')
call parse_real_variable('tmaxpro', tmaxpro, 0.0D0, 1.0D3, &
'Maximum temp rise during quench (K)')
case ('quench_model')
call parse_string_variable('quench_model', quench_model, &
'Switch for TF coil quench model (Only applies to REBCO magnet at present)')
case ('tmax_croco')
call parse_real_variable('tmax_croco', tmax_croco, 4.0D0, 1.0D3, &
'CroCo strand: maximum temp during a quench (K)')
! case ('tmax_jacket')
! call parse_real_variable('tmax_jacket', tmax_jacket, 4.0D0, 1.0D3, &
! 'Jacket: maximum temp during a quench (K)')
case ('tmpcry')
call parse_real_variable('tmpcry', tmpcry, 0.01D0, 293.0D0, &
'Cryogenic temperature (K)')
case ('vcool')
call parse_real_variable('vcool', vcool, 0.001D0, 100.0D0, &
'Inlet centrepost coolant speed (m/s)')
case ('vdalw')
call parse_real_variable('vdalw', vdalw, 0.0D0, 100.0D0, &
'Max V across TFC during quench (kV)')
case ('f_vforce_inboard')
call parse_real_variable('f_vforce_inboard', f_vforce_inboard, 0.0D0, 1.0D0, &
'Fraction of vertical force taken by the TF inboard leg')
case ('vftf')
call parse_real_variable('vftf', vftf, 0.0D0, 1.0D0, &
'Coolant fraction of TF coil leg')
! PF coil settings
case ('rhopfbus')
call parse_real_variable('rhopfbus', rhopfbus, 0.0D0, 1.0D-5, &
'CS and PF coil bus (feeders) resistivity (ohm-m)')
case ('bmaxcs_lim')
call parse_real_variable('bmaxcs_lim', bmaxcs_lim, 0.01D0, 100.0D0, &
'Maximum allowed peak field on central solenoid')
case ('fbmaxcs')
call parse_real_variable('fbmaxcs', fbmaxcs, 0.01D0, 1.0D0, &
'F-value for max peak CS field (con. 79, itvar 149)')
case ('alstroh')
call parse_real_variable('alstroh', alstroh, 1.0D6, 1.0D11, &
'Allowable hoop stress in Central Solenoid structural material (Pa)')
case ('i_cs_stress')
call parse_int_variable('i_cs_stress', i_cs_stress, 0, 1, &
'Switch for CS stress calculation')
case ('alfapf')
call parse_real_variable('alfapf', alfapf, 1.0D-12, 1.0D0, &
'PF coil current smoothing parameter')
case ('coheof')
call parse_real_variable('coheof', coheof, 1.0D4, 5.0D8, &
'Central Solenoid current density at EOF')
case ('cptdin')
call parse_real_array('cptdin', cptdin, isub1, ngc2, &
'Current per turn for PF coil', icode)
case ('etapsu')
call parse_real_variable('etapsu', etapsu, 0.0D0, 1.0D0, &
'Efficiency of ohmic heating')
case ('fcohbop')
call parse_real_variable('fcohbop', fcohbop, 0.0D0, 1.0D0, &
'Central Solenoid J ratio : BOP/EOF')
case ('fcuohsu')
call parse_real_variable('fcuohsu', fcuohsu, 0.0D0, 1.0D0, &
'Cu frac of conductor in Central Solenoid cable')
case ('fcupfsu')
call parse_real_variable('fcupfsu', fcupfsu, 0.0D0, 1.0D0, &
'Cu fraction of PF cable conductor')
case ('ipfloc')
call parse_int_array('ipfloc', ipfloc, isub1, ngrpmx, &
'PF coil location', icode)
case ('ipfres')
call parse_int_variable('ipfres', ipfres, 0, 1, &
'Switch for supercond / resist PF coils')
case ('isumatoh')
call parse_int_variable('isumatoh', isumatoh, 1, 9, &
'Central Solenoid superconductor material')
case ('isumatpf')
call parse_int_variable('isumatpf', isumatpf, 1, 9, &
'PF coil superconductor material')
case ('supercond_cost_model')
call parse_int_variable('supercond_cost_model', supercond_cost_model, 0, 1, &
'Superconductor cost model')
case ('i_pf_current')
call parse_int_variable('i_pf_current', i_pf_current, 0, 2, &
'Switch for controlling the current of the PF coils')
case ('i_sup_pf_shape')
call parse_int_variable('i_sup_pf_shape', i_sup_pf_shape, 0, 1, &
'Switch to place outboard PF coils when TF superconducting')
case ('ncls')
call parse_int_array('ncls', ncls, isub1, ngrpmx+2, &
'No of coils in PF group', icode)
case ('nfxfh')
call parse_int_variable('nfxfh', nfxfh, 1, nfixmx/2, &
'Central Solenoid splitting parameter')
case ('ngrp')
call parse_int_variable('ngrp', ngrp, 0, ngrpmx, &
'No of groups of PF coils')
case ('ohhghf')
call parse_real_variable('ohhghf', ohhghf, 0.0D0, 2.0D0, &
'Central Solenoid height / TF coil height')
case ('pfclres')
call parse_real_variable('pfclres', pfclres, 0.0D0, 1.0D-4, &
'PF coil resistivity (ohm-m)')
case ('rjconpf')
call parse_real_array('rjconpf', rjconpf, isub1, ngc2, &
'Average J of PF coil (A/m2)', icode)
case ('routr')
call parse_real_variable('routr', routr, -3.0D0, 3.0D0, &
'Gap from outboard TFC leg for PFC')
case ('rpf1')
call parse_real_variable('rpf1', rpf1, 0.0D0, 3.0D0, &
'Radial offset for location 1 PF coils')
case ('rpf2')
call parse_real_variable('rpf2', rpf2, -3.0D0, 3.0D0, &
'Radial offset for location 2 PF coils')
case ('rref')
call parse_real_array('rref', rref, isub1, ngrpmx, &
'radius of location 4 coil groups, minor radii from major radius', icode)
case ('ccl0_ma')
call parse_real_array('ccl0_ma', ccl0_ma, isub1, ngrpmx, &
'Flux-swing cancel current of PF coil groups, MA', icode)
case ('ccls_ma')
call parse_real_array('ccls_ma', ccls_ma, isub1, ngrpmx, &
'Equilibrium current of PF coil groups, MA', icode)
case ('sigpfcalw')
call parse_real_variable('sigpfcalw', sigpfcalw, 1.0D0, 1.0D3, &
'Allowable stress in the PF coil case (MPa)')
case ('sigpfcf')
call parse_real_variable('sigpfcf', sigpfcf, 0.1D0, 1.0D0, &
'Fraction of JxB force supported by PF coil case')
case ('vf')
call parse_real_array('vf', vf, isub1, ngc2, &
'Void fraction of PF coil', icode)
case ('vfohc')
call parse_real_variable('vfohc', vfohc, 0.0D0, 1.0D0, &
'Central Solenoid void fraction for coolant')
case ('zref')
call parse_real_array('zref', zref, isub1, ngrpmx, &
'height of location 3 and 4 coil groups / minor radius', icode)
case ('afw')
call parse_real_variable('afw', afw, 1.0D-3, 0.5D0, &
'Inner radius of first wall coolant channel (m)')
case ('fw_wall')
call parse_real_variable('fw_wall', fw_wall, 0.5D-3, 0.1D0, &
'wall thickness of first wall coolant channels (m)')
case ('pitch')
call parse_real_variable('pitch', pitch, 0.5D-3, 0.1D0, &
'pitch of first wall cooling channels (m)')
case ('fwinlet')
call parse_real_variable('fwinlet', fwinlet, 300.0d0, 1500.0D0, &
'inlet temperature of first wall coolant (K)')
case ('fwoutlet')
call parse_real_variable('fwoutlet', fwoutlet, 300.0d0, 1500.0D0, &
'outlet temperature of first wall coolant (K)')
case ('fwpressure')
call parse_real_variable('fwpressure', fwpressure, 1.0d5, 1.0D8, &
'first wall coolant pressure (Pa)')
case ('fwcoolant')
call parse_string_variable('fwcoolant', fwcoolant, 'first wall coolant')
call lower_case(fwcoolant)
case ('roughness')
call parse_real_variable('roughness', roughness, 0.0d0, 1.0D-2, &
'first wall channel roughness epsilon')
case ('fw_channel_length')
call parse_real_variable('fw_channel_length', fw_channel_length, 1.0D-3, 1.0D3, &
'first wall channel length')
case ('peaking_factor')
call parse_real_variable('peaking_factor', peaking_factor, 1.0d0, 100.0D0, &
'peaking factor for first wall heat loads')
case ('bctmp')
call parse_real_variable('bctmp', bctmp, 1.0D0, 800.0D0, &
'First wall bulk coolant temperature (C)')
case ('blpressure')
call parse_real_variable('blpressure', blpressure, 1.0D5, 1.0D8, &
'Blanket coolant pressure (Pa)')
case ('blpressure_liq')
call parse_real_variable('blpressure_liq', blpressure_liq, 1.0D5, 1.0D8, &
'Blanket liquid metal breeder/coolant pressure (Pa)')
case ('n_liq_recirc')
call parse_int_variable('n_liq_recirc', n_liq_recirc, 1, 50, &
'Selected number of liquid metal breeder recirculations per day')
case ('bz_channel_conduct_liq')
call parse_real_variable('bz_channel_conduct_liq', bz_channel_conduct_liq, 1.0D-6, 1.0D6, &
'Conductance of liquid metal breeder duct walls (A V-1 m-1)')
case ('pnuc_fw_ratio_dcll')
call parse_real_variable('pnuc_fw_ratio_dcll', pnuc_fw_ratio_dcll, 0.0D0, 1.0D0, &
'Ratio of FW nuclear power as fraction of total (FW+BB)')
case ('f_nuc_pow_bz_struct')
call parse_real_variable('f_nuc_pow_bz_struct', f_nuc_pow_bz_struct, 0.0D0, 1.0D0, &
'Fraction of BZ power cooled by primary coolant for dual-coolant balnket')
case ('coolp')
call parse_real_variable('coolp', coolp, 1.0D5, 1.0D8, &
'blanket coolant pressure (Pa) stellarator ONLY')
case ('dtstor')
call parse_real_variable('dtstor', dtstor, 50.0D0, 500.0D0, &
'Max temp change in thermal storage medium (K)')
case ('istore')
call parse_int_variable('istore', istore, 1, 3, &
'Switch for thermal storage option')
case ('itcycl')
call parse_int_variable('itcycl', itcycl, 1, 3, &
'Switch for 1st wall axial stress model')
case ('lpulse')
call parse_int_variable('lpulse', lpulse, 0, 1, &
'Switch for pulsed reactor model')
case ('copperaoh_m2')
call parse_real_variable('copperaoh_m2', copperaoh_m2, 1.0D0, 1.0D10, &
'CS coil current / copper area (A/m2)')
case ('copperaoh_m2_max')
call parse_real_variable('copperaoh_m2_max', copperaoh_m2_max, 1.0D4, 1.0D10, &
'Maximum CS coil current / copper area (A/m2)')
case ('f_copperaoh_m2')
call parse_real_variable('f_copperaoh_m2', f_copperaoh_m2, 1.0D-3, 1.0D0, &
'f-value for constraint 75: CS coil current / copper area < copperaoh_m2_max')
! First wall, blanket, shield settings
case ('primary_pumping')
call parse_int_variable('primary_pumping', primary_pumping, 0, 3, &
'Switch for pumping of primary coolant')
case ('htpmw_blkt')
call parse_real_variable('htpmw_blkt', htpmw_blkt, 0.0D0, 1.0D3, &
'blanket coolant mechanical pumping power (MW)')
case ('htpmw_div')
call parse_real_variable('htpmw_div', htpmw_div, 0.0D0, 1.0D3, &
'divertor coolant mechanical pumping power (MW)')
case ('htpmw_fw')
call parse_real_variable('htpmw_fw', htpmw_fw, 0.0D0, 1.0D3, &
'first wall coolant mechanical pumping power (MW)')
case ('htpmw_shld')
call parse_real_variable('htpmw_shld', htpmw_shld, 0.0D0, 1.0D3, &
'shield and vacuum vessel coolant mechanical pumping power (MW)')
case ('i_shield_mat')
call parse_int_variable('i_shield_mat', i_shield_mat, 0, 1, &
'Switch for shield material)')
case ('i_bb_liq')
call parse_int_variable('i_bb_liq', i_bb_liq, 0, 1, &
'Switch for breeding blaket liquid metal')
case ('icooldual')
call parse_int_variable('icooldual', icooldual, 0, 2, &
'Switch for single or dual-coolant blanket)')
case ('ifci')
call parse_int_variable('ifci', ifci, 0, 2, &
'Switch for blanket FCIs)')
case ('inlet_temp_liq')
call parse_real_variable('inlet_temp_liq', inlet_temp_liq, 508.D0, 1.5D3, &
'Inlet temperature for blanket liquid metal')
case ('outlet_temp_liq')
call parse_real_variable('outlet_temp_liq', outlet_temp_liq, 508.D0, 1.5D3, &
'Outlet temperature for blanket liquid metal')
case ('ipump')
call parse_int_variable('ipump', ipump, 0, 2, &
'Switch for same or different pumping system for FW/BB')
case ('ims')
call parse_int_variable('ims', ims, 0, 1, &
' Switch for Multi or Single Modle Segment (MMS or SMS)')
case ('coolwh')
call parse_int_variable('coolwh', coolwh, 1, 2, &
' Blanket coolant type (1=He, 2=H20)')
case ('secondary_cycle')
call parse_int_variable('secondary_cycle', secondary_cycle, 0, 4, &
'Switch for blanket thermodynamic model')
case ('secondary_cycle_liq')
call parse_int_variable('secondary_cycle_liq', secondary_cycle_liq, 2, 4, &
'Switch for blanket thermodynamic model - liquid breeder')
case ('afwi')
call parse_real_variable('afwi', afwi, 1.0D-3, 0.05D0, &
'I/B fw/blkt coolant channel inner radius (m)')
case ('afwo')
call parse_real_variable('afwo', afwo, 1.0D-3, 0.05D0, &
'O/B fw/blkt coolant channel inner radius (m)')
case ('inlet_temp')
call parse_real_variable('inlet_temp', inlet_temp, 200.0D0, 600.0D0, &
'Coolant inlet temperature (K)')
case ('irefprop')
call parse_int_variable('irefprop', irefprop, 0, 1, &
'Switch to use REFPROP routines')
case ('outlet_temp')
call parse_real_variable('outlet_temp', outlet_temp, 450.0D0, 900.0D0, &
'Coolant outlet temperature (K)')
case ('nblktmodpo')
call parse_int_variable('nblktmodpo', nblktmodpo, 1, 16, &
'No of o/b blanket modules in poloidal direction')
case ('nblktmodpi')
call parse_int_variable('nblktmodpi', nblktmodpi, 1, 16, &
'No of i/b blanket modules in poloidal direction')
case ('nblktmodto')
call parse_int_variable('nblktmodto', nblktmodto, 8, 96, &
'No of o/b blanket modules in toroidal direction')
case ('nblktmodti')
call parse_int_variable('nblktmodti', nblktmodti, 8, 96, &
'No of i/b blanket modules in toroidal direction')
case ('tfwmatmax')
call parse_real_variable('tfwmatmax', tfwmatmax, 500.0D0, 2000.0D0, &
'Max temperature of first wall material (K)')
case ('fw_th_conductivity')
call parse_real_variable('fw_th_conductivity', fw_th_conductivity, 1.0D0, 100.0D0, &
'thermal conductivity of first wall material at 293 K (W/m/K)')
case ('etaiso')
call parse_real_variable('etaiso', etaiso, 0.1D0, 1.0D0, &
'Isentropic efficiency of coolant pumps')
case ('blkttype')
call parse_int_variable('blkttype', blkttype, 1, 3, &
'Switch for blanket type')
case ('blktmodel')
call parse_int_variable('blktmodel', blktmodel, 0, 1, &
'Switch for blanket neutronics calculations')
case ('breedmat')
call parse_int_variable('breedmat', breedmat, 1, 3, &
'Switch for blanket breeder material')
case ('declblkt')
call parse_real_variable('declblkt', declblkt, 0.01D0, 0.2D0, &
'Neutron decay length in blanket')
case ('declfw')
call parse_real_variable('declfw', declfw, 0.01D0, 0.2D0, &
'Neutron decay length in first wall')
case ('declshld')
call parse_real_variable('declshld', declshld, 0.01D0, 0.2D0, &
'Neutron decay length in blanket')
case ('denstl')
call parse_real_variable('denstl', denstl, 5.0D3, 1.0D4, &
'Density of steel (kg/m3)')
case ('denw')
call parse_real_variable('denw', denw, 1.0D4, 5.0D4, &
'Density of tungsten (kg/m3)')
case ('emult')
call parse_real_variable('emult', emult, 1.0D0, 2.0D0, &
'Energy multip. in blanket and shield')
case ('fblbe')
call parse_real_variable('fblbe', fblbe, 0.0D0, 1.0D0, &
'Beryllium fraction of blanket')
case ('fblbreed')
call parse_real_variable('fblbreed', fblbreed, 0.0D0, 1.0D0, &
'Breeder fraction of blanket breeding unit')
case ('fblhebmi')
call parse_real_variable('fblhebmi', fblhebmi, 0.0D0, 1.0D0, &
'Helium fraction of IB blanket box manifold')
case ('fblhebmo')
call parse_real_variable('fblhebmo', fblhebmo, 0.0D0, 1.0D0, &
'Helium fraction of OB blanket box manifold')
case ('fblhebpi')
call parse_real_variable('fblhebpi', fblhebpi, 0.0D0, 1.0D0, &
'Helium fraction of IB blanket back plate')
case ('fblhebpo')
call parse_real_variable('fblhebpo', fblhebpo, 0.0D0, 1.0D0, &
'Helium fraction of OB blanket back plate')
case ('fblli')
call parse_real_variable('fblli', fblli, 0.0D0, 1.0D0, &
'Lithium fraction of blanket')
case ('fblli2o')
call parse_real_variable('fblli2o', fblli2o, 0.0D0, 1.0D0, &
'Li2O fraction of blanket')
case ('fbllipb')
call parse_real_variable('fbllipb', fbllipb, 0.0D0, 1.0D0, &
'Li-Pb fraction of blanket')
case ('fblss')
call parse_real_variable('fblss', fblss, 0.0D0, 1.0D0, &
'Stainless steel fraction of blanket')
case ('fblvd')
call parse_real_variable('fblvd', fblvd, 0.0D0, 1.0D0, &
'Vanadium fraction of blanket')
case ('fdiv')
call parse_real_variable('fdiv', fdiv, 0.0D0, 1.0D0, &
'Divertor area fraction')
case ('fhcd')
call parse_real_variable('fhcd', fhcd, 0.0D0, 1.0D0, &
'HCD + diagnostics area fraction')
case ('fhole')
call parse_real_variable('fhole', fhole, 0.0D0, 1.0D0, &
'Hole area fraction')
case ('fvoldw')
call parse_real_variable('fvoldw', fvoldw, 0.0D0, 10.0D0, &
'Fudge factor for vacuum vessel volume')
!+PJK FVOLSI, FVOLSO should now be restricted to <= 1
case ('fvolsi')
call parse_real_variable('fvolsi', fvolsi, 0.0D0, 10.0D0, &
'Fudge factor for inboard shield volume')
case ('fvolso')
call parse_real_variable('fvolso', fvolso, 0.0D0, 10.0D0, &
'Fudge factor for outboard shield volume')
!-PJK
case ('fwclfr')
call parse_real_variable('fwclfr', fwclfr, 0.0D0, 1.0D0, &
'First wall coolant fraction')
case ('fwbsshape')
call parse_int_variable('fwbsshape', fwbsshape, 1, 2, &
'Switch for fw/blanket/shield/vv shape')
case ('fw_armour_thickness')
call parse_real_variable('fw_armour_thickness', fw_armour_thickness, 0.0D0, 1.0D0, &
'First wall W coating thickness (m)')
case ('hcdportsize')
call parse_int_variable('hcdportsize', hcdportsize, 1, 2, &
'H/CD port size')
case ('iblanket')
call parse_int_variable('iblanket', iblanket, 1, 5, 'Switch for blanket model')
if ((iblanket == 2).or.(iblanket == 4)) then
write(outfile,*) ' '
write(outfile,*) '**********'
write(outfile,*) 'iblanket = 2/4, KIT HCPB/HCLL model has been removed -'
write(outfile,*) 'please select a different blanket model.'
write(outfile,*) '**********'
write(outfile,*) ' '
obsolete_var = .true.
endif
if (iblanket == 3) then
fwith = 0.03D0
fwoth = 0.03D0
fw_armour_thickness = 0.003D0
end if
case ('iblnkith')
call parse_int_variable('iblnkith', iblnkith, 0, 1, 'Switch for inboard blanket')
case ('inuclear')
call parse_int_variable('inuclear', inuclear, 0, 1, &
'switch for nuclear heating in the coils')
case ('qnuc')
call parse_real_variable('qnuc', qnuc, 0.0D0, 1.0D6, &
'nuclear heating in the coils (W)')
case ('li6enrich')
call parse_real_variable('li6enrich', li6enrich, 7.40D0, 100.0D0, &
'Li-6 enrichment')
! CCFE hcpb BB module (also includes the CP shielding for ST)
case ('breeder_f')
call parse_real_variable('breeder_f', breeder_f, 0.00D0, 1.0D0, &
'Volume of Li4SiO4 / (Volume of Be12Ti + Li4SiO4)')
case ('breeder_multiplier')
call parse_real_variable('breeder_multiplier', breeder_multiplier, 0.0D0, 1.0D0, &
'combined breeder/multipler fraction of blanket by volume')
case ('vfcblkt')
call parse_real_variable('vfcblkt', vfcblkt, 0.0D0, 1.0D0, &
'He coolant fraction of blanket by volume')
case ('vfpblkt')
call parse_real_variable('vfpblkt', vfpblkt, 0.0D0, 1.0D0, &
'He purge gas fraction of blanket by volume')
case ('f_neut_shield')
call parse_real_variable('f_neut_shield', f_neut_shield, 0.0D0, 1.0D0, &
'He purge gas fraction of blanket by volume')
case ('iblanket_thickness')
call parse_int_variable('iblanket_thickness', iblanket_thickness, 1, 3, &
'Blanket thickness switch')
if (iblanket_thickness == 1) then
blnkith = 0.53D0
blnkoth = 0.91D0
else if (iblanket_thickness == 2) then
blnkith = 0.64D0
blnkoth = 1.11D0
else if (iblanket_thickness == 3) then
blnkith = 0.75D0
blnkoth = 1.30D0
end if
case ('npdiv')
call parse_int_variable('npdiv', npdiv, 0, 4, &
'Number of divertor ports')
case ('nphcdin')
call parse_int_variable('nphcdin', nphcdin, 0, 4, &
'Number of inboard H/CD ports')
case ('nphcdout')
call parse_int_variable('nphcdout', nphcdout, 0, 4, &
'Number of outboard H/CD ports')
case ('vfblkt')
call parse_real_variable('vfblkt', vfblkt, 0.0D0, 1.0D0, &
'Coolant void fraction in blanket')
case ('vfshld')
call parse_real_variable('vfshld', vfshld, 0.0D0, 1.0D0, &
'Coolant void fraction in shield')
case ('wallpf')
call parse_real_variable('wallpf', wallpf, 1.0D0, 2.0D0, &
'Neutron wall load peaking factor')
! Heat transport / power settings
case ('baseel')
call parse_real_variable('baseel', baseel, 1.0D6, 1.0D10, &
'Base plant electric load (W)')
case ('crypmw_max')
call parse_real_variable('crypmw_max', crypmw_max, 0.01D0, 200.0D0, &
' Maximum cryogenic plant power (MW)')
case ('f_crypmw')
call parse_real_variable('f_crypmw', f_crypmw, 0.0D0, 100.0D0, &
' f-value for cryogenic plant power (icc = 87, c = 164)')
case ('etahtp')
call parse_real_variable('etahtp', etahtp, 0.1D0, 1.0D0, &
'Coolant pump electrical efficiency')
case ('etatf')
call parse_real_variable('etatf', etatf, 0.0D0, 1.0D0, &
'AC to resistive power conversion for TF coils')
case ('etath')
call parse_real_variable('etath', etath, 0.0D0, 1.0D0, &
'Thermal-electric conversion efficiency')
case ('fmgdmw')
call parse_real_variable('fmgdmw', fmgdmw, 0.0D0, 100.0D0, &
'Power to MGF units (MW)')
case ('fpumpblkt')
call parse_real_variable('fpumpblkt', fpumpblkt, 0.0D0, 0.2D0, &
'Blanket pumping/thermal power ratio')
case ('fpumpdiv')
call parse_real_variable('fpumpdiv', fpumpdiv, 0.0D0, 0.2D0, &
'Divertor pumping/thermal power ratio')
case ('fpumpfw')
call parse_real_variable('fpumpfw', fpumpfw, 0.0D0, 0.2D0, &
'First wall pumping/thermal power ratio')
case ('fpumpshld')
call parse_real_variable('fpumpshld', fpumpshld, 0.0D0, 0.2D0, &
'Shield pumping/thermal power ratio')
case ('htpmw_min')
call parse_real_variable('htpmw_min', htpmw_min, 0.0D0, 500.0D0, &
'Minimum total electrical power for primary coolant pumps (MW)')
case ('ipowerflow')
call parse_int_variable('ipowerflow', ipowerflow, 0, 1, &
'Switch for power flow model')
case ('iprimshld')
call parse_int_variable('iprimshld', iprimshld, 0, 1, &
'Switch for shield thermal power destiny')
case ('pwpm2')
call parse_real_variable('pwpm2', pwpm2, 0.0D0, 1.0D3, &
'Base AC power requirement (W/m2)')
case ('pinjmax')
call parse_real_variable('pinjmax', pinjmax, 0.0D0, 1.0D3, &
'Maximum injector wall plug power during pulse (MW)')
case ('trithtmw')
call parse_real_variable('trithtmw', trithtmw, 0.0D0, 100.0D0, &
'Tritium process power (MW)')
case ('vachtmw')
call parse_real_variable('vachtmw', vachtmw, 0.0D0, 100.0D0, &
'Vacuum pump power (MW)')
case ('t_in_bb')
call parse_real_variable('t_in_bb', t_in_bb, 200.0D0, 1000.0D0, &
'Helium or Gas Inlet Temperature (K)')
case ('t_out_bb')
call parse_real_variable('t_out_bb', t_out_bb, 200.0D0, 1000.0D0, &
'Helium or Gas Outlet Temperature (K)')
case ('dp_he')
call parse_real_variable('dp_he', dp_he, 0.0D0, 10.0D6, &
'Helium Pressure drop or Gas Pressure drop (Pa)')
case ('dp_fw_blkt')
call parse_real_variable('dp_fw_blkt', dp_fw_blkt, 0.0D0, 10.0D6, &
'Pressure drop across FW and blanket (Pa)')
case ('dp_fw')
call parse_real_variable('dp_fw', dp_fw, 0.0D0, 10.0D6, &
'Pressure drop across FW (Pa)')
case ('dp_blkt')
call parse_real_variable('dp_blkt', dp_blkt, 0.0D0, 10.0D6, &
'Pressure drop across blanket (Pa)')
case ('dp_liq')
call parse_real_variable('dp_liq', dp_liq, 0.0D0, 10.0D6, &
'Pressure drop across liquid metal blanket (Pa)')
case ('p_he')
call parse_real_variable('p_he', p_he, 0.0D0, 100.0D6, &
'Pressure in FW and blanket coolant at pump exit')
case ('gamma_he')
call parse_real_variable('gamma_he', gamma_he, 1.0D0, 2.0D0, &
'Ratio of specific heats for helium or for another Gas')
! Cost information settings
case ('abktflnc')
call parse_real_variable('abktflnc', abktflnc, 0.1D0, 100.0D0, &
'Allowable blanket fluence (MW-yr/m2)')
case ('adivflnc')
call parse_real_variable('adivflnc', adivflnc, 0.1D0, 100.0D0, &
'Allowable divertor fluence (MW-yr/m2)')
case ('cfactr')
call parse_real_variable('cfactr', cfactr, 0.0D0, 1.0D0, &
'Plant capacity factor or availability')
case ('cfind')
call parse_real_array('cfind', cfind, isub1, 4, &
'Indirect cost factor vs LSA', icode)
case ('cpstflnc')
call parse_real_variable('cpstflnc', cpstflnc, 0.01D0, 30.0D0, &
'Allowable centrepost neutron fluence (MW-yr/m2)')
case ('cplife_input')
call parse_real_variable('cplife_input', cplife_input, 0.001D0, 50.0D0, &
'Full power centrepost lifetime (yr)')
case ('decomf')
call parse_real_variable('decomf', decomf, 0.0D0, 1.0D0, &
'Decommissioning fund fraction')
case ('dintrt')
call parse_real_variable('dintrt', dintrt, 0.0D0, 0.1D0, &
'Borrowing - saving interest rate difference')
case ('dtlife')
call parse_real_variable('dtlife', dtlife, 0.0D0, 15.0D0, &
'Decommissioning time prior to end of plant')
case ('fcap0')
call parse_real_variable('fcap0', fcap0, 1.0D0, 1.5D0, &
'Ave cost of money for plant construction')
case ('fcap0cp')
call parse_real_variable('fcap0cp', fcap0cp, 1.0D0, 1.5D0, &
'Ave cost of money for replaceable components')
case ('fcdfuel')
call parse_real_variable('fcdfuel', fcdfuel, 0.0D0, 1.0D0, &
'Fraction of CD cost assumed fuel cost')
case ('fcr0')
call parse_real_variable('fcr0', fcr0, 0.0D0, 1.0D0, &
'Fixed charge rate during construction')
case ('fkind')
call parse_real_variable('fkind', fkind, 0.5D0, 1.0D0, &
'Multiplier for Nth of a kind costs')
case ('i_cp_lifetime')
call parse_int_variable('i_cp_lifetime', i_cp_lifetime, 0, 3, &
'Switch for ST centrepost lifetime contraint (10) setting')
case ('ifueltyp')
call parse_int_variable('ifueltyp', ifueltyp, 0, 2, &
'Switch for costing of 1st wall etc.')
case ('ipnet')
call parse_int_variable('ipnet', ipnet, 0, 1, &
'Switch for net electric power calc.')
case ('ireactor')
call parse_int_variable('ireactor', ireactor, 0, 1, &
'Switch for MWe / C-o-E calculation')
case ('lsa')
call parse_int_variable('lsa', lsa, 1, 4, &
'Level of safety assurance')
case ('output_costs')
call parse_int_variable('output_costs', output_costs, 0, 1, &
'Switch for writing costs to file')
case ('discount_rate')
call parse_real_variable('discount_rate', discount_rate, 0.0D0, 0.5D0, &
'Effective cost of money')
case ('startupratio')
call parse_real_variable('startupratio', startupratio, 0.0D0, 10.0D0, &
'Ratio (additional HCD power for start-up) / (flat-top operational requirements)')
case ('tmain')
call parse_real_variable('tmain', tmain, 0.0D0, 100.0D0, &
'Maintenance time for replacing CP (years) (iavail = 3)')
case ('u_unplanned_cp')
call parse_real_variable('u_unplanned_cp', u_unplanned_cp, 0.0D0, 1.0D0, &
'User-input CP unplanned unavailability (iavail = 3)')
! Unit cost settings
case ('cconfix')
call parse_real_variable('cconfix', cconfix, 50.0D0, 200.0D0, &
'Fixed cost of superconducting cable ($/m)')
case ('cconshpf')
call parse_real_variable('cconshpf', cconshpf, 50.0D0, 200.0D0, &
'PF coil steel conduit/sheath cost ($/m)')
case ('cconshtf')
call parse_real_variable('cconshtf', cconshtf, 50.0D0, 200.0D0, &
'TF coil steel conduit/sheath cost ($/m)')
case ('cland')
call parse_real_variable('cland', cland, 10.0D0, 100.0D0, &
'Cost of land (M$)')
case ('costexp')
call parse_real_variable('costexp', costexp, 0.01D0, 5.0D0, &
'Cost exponent for 2015 costs model')
case ('costexp_pebbles')
call parse_real_variable('costexp_pebbles', costexp_pebbles, 0.01D0, 5.0D0, &
'cost exponent for pebbles in 2015 costs model')
case ('cost_factor_buildings')
call parse_real_variable('cost_factor_buildings', cost_factor_buildings, 0.1D0, 10.0D0, &
'Cost scaling factor for buildings (2015 costs model)')
case ('cost_factor_land')
call parse_real_variable('cost_factor_land', cost_factor_land, 0.1D0, 10.0D0, &
'Cost scaling factor for land (2015 costs model)')
case ('cost_factor_tf_coils')
call parse_real_variable('cost_factor_tf_coils', cost_factor_tf_coils, 0.1D0, 10.0D0, &
'Cost scaling factor for TF coils (2015 costs model)')
case ('cost_factor_fwbs')
call parse_real_variable('cost_factor_fwbs', cost_factor_fwbs, 0.1D0, 10.0D0, &
'Cost scaling factor for fwbs (2015 costs model)')
case ('cost_factor_rh')
call parse_real_variable('cost_factor_rh', cost_factor_rh, 0.1D0, 10.0D0, &
'Cost scaling factor for remote handling (2015 costs model)')
case ('cost_factor_vv')
call parse_real_variable('cost_factor_vv', cost_factor_vv, 0.1D0, 10.0D0, &
'Cost scaling factor for vacuum vessel (2015 costs model)')
case ('cost_factor_bop')
call parse_real_variable('cost_factor_bop', cost_factor_bop, 0.1D0, 10.0D0, &
'Cost scaling factor for energy conversion system (2015 costs model)')
case ('cost_factor_misc')
call parse_real_variable('cost_factor_misc', cost_factor_misc, 0.1D0, 10.0D0, &
'Cost scaling factor for remaining subsystems (2015 costs model)')
case ('maintenance_fwbs')
call parse_real_variable('maintenance_fwbs', maintenance_fwbs, 0.0D0, 1.0D0, &
'Maintenance cost factor: first wall, blanket, shield, divertor')
case ('maintenance_gen')
call parse_real_variable('maintenance_gen', maintenance_gen, 0.0D0, 1.0D0, &
'Maintenance cost factor: All other components except coils, vacuum vessel, thermal shield, cryostat, land')
case ('amortization')
call parse_real_variable('amortization', amortization, 1.0D0, 50.0D0, &
'amortization factor (fixed charge factor) "A" (years)')
case ('cost_model')
call parse_int_variable('cost_model', cost_model, 0, 2, &
'Switch for cost model')
case ('cowner')
call parse_real_variable('cowner', cowner, 0.0D0, 1.0D0, &
'Owner cost factor')
case ('csi')
call parse_real_variable('csi', csi, 1.0D0, 100.0D0, &
'Allowance for site costs (M$)')
case ('cturbb')
call parse_real_variable('cturbb', cturbb, 100.0D0, 1000.0D0, &
'Cost of turbine building (M$)')
case ('fcontng')
call parse_real_variable('fcontng', fcontng, 0.0D0, 1.0D0, &
'Project contingency factor')
case ('ucblbe')
call parse_real_variable('ucblbe', ucblbe, 1.0D0, 1.0D3, &
'Unit cost for blanket Be ($/kg)')
case ('ucblbreed')
call parse_real_variable('ucblbreed', ucblbreed, 1.0D0, 1.0D3, &
'Unit cost for blanket breeder material ($/kg)')
case ('ucblli')
call parse_real_variable('ucblli', ucblli, 1.0D1, 1.0D4, &
'Unit cost for blanket Li ($/kg)')
case ('ucblli2o')
call parse_real_variable('ucblli2o', ucblli2o, 1.0D2, 1.0D4, &
'Unit cost for blanket Li2O ($/kg)')
case ('ucbllipb')
call parse_real_variable('ucbllipb', ucbllipb, 1.0D2, 1.0D4, &
'Unit cost for blanket Li-Pb ($/kg)')
case ('ucblss')
call parse_real_variable('ucblss', ucblss, 10.0D0, 1.0D3, &
'Unit cost for blanket st.steel ($/kg)')
case ('ucblvd')
call parse_real_variable('ucblvd', ucblvd, 100.0D0, 1.0D3, &
'Unit cost for blanket Vd ($/kg)')
case ('ucbus')
call parse_real_variable('ucbus', ucbus, 0.01D0, 10.0D0, &
'Cost of Al bus for TF coil ($/A-m)')
case ('uccase')
call parse_real_variable('uccase', uccase, 1.0D0, 1.0D3, &
'Cost of superconductor case ($/kg)')
case ('uccpcl1')
call parse_real_variable('uccpcl1', uccpcl1, 1.0D0, 1.0D3, &
'Cost of tapered copper ($/kg)')
case ('uccpclb')
call parse_real_variable('uccpclb', uccpclb, 1.0D0, 1.0D3, &
'Cost TF outer leg plate coils ($/kg)')
case ('uccry')
call parse_real_variable('uccry', uccry, 1.0D4, 1.0D6, &
'Heat transport cryoplant costs ($/W)')
case ('uccryo')
call parse_real_variable('uccryo', uccryo, 1.0D0, 1.0D3, &
'Unit cost for cryostat ($/kg)')
case ('uccu')
call parse_real_variable('uccu', uccu, 10.0D0, 1.0D2, &
'Copper in SC cable cost ($/kg)')
case ('ucdiv')
call parse_real_variable('ucdiv', ucdiv, 1.0D3, 1.0D7, &
'Cost of divertor blade ($)')
case ('ucech')
call parse_real_variable('ucech', ucech, 1.0D0, 10.0D0, &
'ECH system cost ($/W)')
case ('ucf1')
call parse_real_variable('ucf1', ucf1, 1.0D6, 50.0D6, &
'Fuelling system cost ($)')
case ('ucfnc')
call parse_real_variable('ucfnc', ucfnc, 10.0D0, 100.0D0, &
'Outer PF fence support cost ($/kg)')
case ('ucfuel')
call parse_real_variable('ucfuel', ucfuel, 1.0D0, 10.0D0, &
'Cost of fuel (M$/yr)')
case ('uche3')
call parse_real_variable('uche3', uche3, 1.0D5, 1.0D7, &
'Cost of He3 fuel ($/kg)')
case ('uchrs')
call parse_real_variable('uchrs', uchrs, 1.0D7, 5.0D8, &
'Cost of heat rejection system ($)')
case ('uchts')
call parse_real_array('uchts', uchts, isub1, 2, &
'Cost of heat transp system equip per loop ($/W)', icode)
case ('uciac')
call parse_real_variable('uciac', uciac, 1.0D7, 1.0D9, &
'Cost of instrum, control & diag.($)')
case ('ucich')
call parse_real_variable('ucich', ucich, 1.0D0, 10.0D0, &
'Cost of ICH system ($/W)')
case ('uclh')
call parse_real_variable('uclh', uclh, 1.0D0, 10.0D0, &
'LH system cost ($/W)')
case ('ucme')
call parse_real_variable('ucme', ucme, 1.0D7, 1.0D9, &
'cost of maintenance equip. ($)')
case ('ucmisc')
call parse_real_variable('ucmisc', ucmisc, 1.0D7, 5.0D7, &
'Miscellaneous plant allowance ($)')
case ('ucnbi')
call parse_real_variable('ucnbi', ucnbi, 1.0D0, 10.0D0, &
'NBI system cost ($/W)')
case ('ucoam')
call parse_real_array('ucoam', ucoam, isub1, 4, &
'Annual cost of operation and maintenance', icode)
case ('ucpens')
call parse_real_variable('ucpens', ucpens, 1.0D0, 100.0D0, &
'Penetration shield cost ($/kg)')
case ('ucpfb')
call parse_real_variable('ucpfb', ucpfb, 1.0D0, 1.0D3, &
'Cost of PF coil buses ($/kA-m)')
case ('ucpfbk')
call parse_real_variable('ucpfbk', ucpfbk, 1.0D3, 1.0D5, &
'Cost of PF coil DC breakers ($/MVA)')
case ('ucpfbs')
call parse_real_variable('ucpfbs', ucpfbs, 1.0D3, 1.0D4, &
'Cost of PF burn power supplies ($/kW**0.7)')
case ('ucpfcb')
call parse_real_variable('ucpfcb', ucpfcb, 1.0D3, 1.0D5, &
'Cost of PF coil AC breakers ($/circ)')
case ('ucpfdr1')
call parse_real_variable('ucpfdr1', ucpfdr1, 1.0D0, 1.0D3, &
'Cost factor for dump resistors ($/MJ)')
case ('ucpfic')
call parse_real_variable('ucpfic', ucpfic, 1.0D3, 1.0D5, &
'Cost of PF instrum & cont ($/channel)')
case ('ucpfps')
call parse_real_variable('ucpfps', ucpfps, 1.0D3, 1.0D5, &
'Cost of PF coil pulsed P.S. ($/MVA)')
case ('ucrb')
call parse_real_variable('ucrb', ucrb, 1.0D2, 1.0D3, &
'Cost of reactor building ($/m3)')
case ('ucsc')
call parse_real_array('ucsc', ucsc, isub1, 9, &
'Cost of superconductor ($/kg)', icode)
case ('ucshld')
call parse_real_variable('ucshld', ucshld, 1.0D0, 100.0D0, &
'Cost of shield structural steel ($/kg)')
case ('uctfbr')
call parse_real_variable('uctfbr', uctfbr, 1.0D0, 10.0D0, &
'Cost of TF coil breakers ($/W**0.7)')
case ('uctfbus')
call parse_real_variable('uctfbus', uctfbus, 1.0D0, 1.0D3, &
'Cost of TF coil bus ($/kg)')
case ('uctfps')
call parse_real_variable('uctfps', uctfps, 1.0D0, 1.0D3, &
'Cost of TF power supplies ($/W**0.7)')
case ('uctfsw')
call parse_real_variable('uctfsw', uctfsw, 0.1D0, 10.0D0, &
'Cost of TF slow dump switches ($/A)')
case ('ucturb')
call parse_real_array('ucturb', ucturb, isub1, 2, &
'Cost of turbine plant equipment ($)', icode)
case ('ucwindpf')
call parse_real_variable('ucwindpf', ucwindpf, 100.0D0, 1.0D3, &
'Cost of SCPF windings ($/m)')
case ('ucwindtf')
call parse_real_variable('ucwindtf', ucwindtf, 100.0D0, 1.0D3, &
'Cost of SCTF windings ($/m)')
case ('ucwst')
call parse_real_array('ucwst', ucwst, isub1, 4, &
'cost of waste disposal (M$/yr)', icode)
! Availability settings
case ('iavail')
call parse_int_variable('iavail', iavail, 0, 3, &
'Switch for plant availability model')
case ('ibkt_life')
call parse_int_variable('ibkt_life', ibkt_life, 0, 2, &
'Switch for DEMO fw/blanket lifetime calculation')
case ('life_dpa')
call parse_real_variable('life_dpa', life_dpa, 1.0D1, 1.0D2, &
'Allowable DPA for DEMO fw/blanket lifetime calculation')
case ('avail_min')
call parse_real_variable('avail_min', avail_min, 0.0D0, 1.0D0, &
'Required minimum availability (constraint equation 61)')
case ('favail')
call parse_real_variable('favail', favail, 0.0D0, 1.0D0, &
'F-value for minimum availability (constraint equation 61)')
case ('num_rh_systems')
call parse_int_variable('num_rh_systems', num_rh_systems, 1, 10, &
'Number of remote handling systems (from 1-10)')
case ('conf_mag')
call parse_real_variable('conf_mag', conf_mag, 0.9D0, 1.0D0, &
'c parameter, which determines the temperature margin at which magnet lifetime starts to decline')
case ('div_prob_fail')
call parse_real_variable('div_prob_fail', div_prob_fail, 0.0D0, 1.0D0, &
'Divertor probability of failure (per op day)')
case ('div_umain_time')
call parse_real_variable('div_umain_time', div_umain_time, 0.1D0, 2.0D0, &
'Divertor unplanned maintenance time (years)')
case ('div_nref')
call parse_real_variable('div_nref', div_nref, 1.0D3, 1.0D8, &
'Reference value for cycle life of divertor')
case ('div_nu')
call parse_real_variable('div_nu', div_nu, 1.0D3, 1.0D8, &
'The cycle when the divertor fails with 100% probability')
case ('fwbs_nref')
call parse_real_variable('fwbs_nref', fwbs_nref, 1.0D3, 1.0D8, &
'Reference value for cycle life of blanket')
case ('fwbs_nu')
call parse_real_variable('fwbs_nu', fwbs_nu, 1.0D3, 1.0D8, &
'The cycle when the blanket fails with 100% probability')
case ('fwbs_prob_fail')
call parse_real_variable('fwbs_prob_fail', fwbs_prob_fail, 0.0D0, 1.0D0, &
'Fwbs probability of failure (per op day)')
case ('fwbs_umain_time')
call parse_real_variable('fwbs_umain_time', fwbs_umain_time, 0.1D0, 2.0D0, &
'Fwbs unplanned maintenace time (years)')
case ('redun_vacp')
call parse_real_variable('redun_vacp', redun_vacp, 0.0D0, 100.0D0, &
'Vacuum system pump redundancy level (%)')
case ('tbktrepl')
call parse_real_variable('tbktrepl', tbktrepl, 0.01D0, 2.0D0, &
'Time needed to replace blanket (yr)')
case ('tcomrepl')
call parse_real_variable('tcomrepl', tcomrepl, 0.01D0, 2.0D0, &
'Time needed to replace blanket+divertor (yr)')
case ('tdivrepl')
call parse_real_variable('tdivrepl', tdivrepl, 0.01D0, 2.0D0, &
'Time needed to replace divertor (yr)')
case ('tlife')
call parse_real_variable('tlife', tlife, 1.0D0, 100.0D0, &
'Plant life (yr)')
case ('uubop')
call parse_real_variable('uubop', uubop, 0.005D0, 0.1D0, &
'Unplanned unavailability for BOP')
case ('uucd')
call parse_real_variable('uucd', uucd, 0.005D0, 0.1D0, &
'Unplanned unavailability for CD system')
case ('uudiv')
call parse_real_variable('uudiv', uudiv, 0.005D0, 0.1D0, &
'Unplanned unavailability for divertor')
case ('uufuel')
call parse_real_variable('uufuel', uufuel, 0.005D0, 0.1D0, &
'Unplanned unavailability for fuel system')
case ('uufw')
call parse_real_variable('uufw', uufw, 0.005D0, 0.1D0, &
'Unplanned unavailability for first wall')
case ('uumag')
call parse_real_variable('uumag', uumag, 0.005D0, 0.1D0, &
'Unplanned unavailability for magnets')
case ('uuves')
call parse_real_variable('uuves', uuves, 0.005D0, 0.1D0, &
'Unplanned unavailability for vessel')
! Sweep settings
case ('isweep')
call parse_int_variable('isweep', isweep, 0, ipnscns, &
'Number of scans to perform')
case ('nsweep')
call parse_int_variable('nsweep', nsweep, 1, ipnscnv, &
'Variable used in scan')
case ('sweep')
call parse_real_array('sweep', sweep, isub1, ipnscns, &
'Actual values to use in scan', icode)
case ('scan_dim')
call parse_int_variable('scan_dim', scan_dim, 1, 2, &
'Switch for 1-D or 2-D scan')
case ('isweep_2')
call parse_int_variable('isweep_2', isweep_2, 0, ipnscns, &
'Number of 2D scans to perform')
case ('nsweep_2')
call parse_int_variable('nsweep_2', nsweep_2, 1, ipnscnv, &
'Second variable used in 2D scan')
case ('sweep_2')
call parse_real_array('sweep_2', sweep_2, isub1, ipnscns, &
'Actual values to use in 2D scan', icode)
! Buildings settings
case('i_bldgs_size')
call parse_int_variable('i_bldgs_size', i_bldgs_size, 0, 1, &
'Switch between routines estimating building sizes')
case('i_bldgs_v')
call parse_int_variable('i_bldgs_v', i_bldgs_v, 0, 1, &
'Switch for verbose buildings output')
case ('admv')
call parse_real_variable('admv', admv, 1.0D4, 1.0D6, &
'Administration building volume (m3)')
case ('clh1')
call parse_real_variable('clh1', clh1, 0.0D0, 20.0D0, &
'Clearance TF coil to cryostat top (m)')
case ('clh2')
call parse_real_variable('clh2', clh2, 0.0D0, 30.0D0, &
'Clearance TF coil to foundation (m)')
case ('conv')
call parse_real_variable('conv', conv, 1.0D4, 1.0D6, &
'Control building volume (m3)')
case ('esbldgm3')
call parse_real_variable('esbldgm3', esbldgm3, 1.0D3, 1.0D6, &
'Energy storage building volume (m3)')
case ('fndt')
call parse_real_variable('fndt', fndt, 0.0D0, 10.0D0, &
'Foundation thickness (m)')
case ('hccl')
call parse_real_variable('hccl', hccl, 0.0D0, 10.0D0, &
'Clearance around components in hot cell (m)')
case ('hcwt')
call parse_real_variable('hcwt', hcwt, 0.0D0, 10.0D0, &
'Hot cell wall thickness (m)')
case ('mbvfac')
call parse_real_variable('mbvfac', mbvfac, 0.9D0, 3.0D0, &
'Maintenance building volume multiplier')
case ('pfbldgm3')
call parse_real_variable('pfbldgm3', pfbldgm3, 1.0D4, 1.0D6, &
'PF coil power conv. bldg volume (m3)')
case ('pibv')
call parse_real_variable('pibv', pibv, 1.0D3, 1.0D5, &
'Power injection building volume (m3)')
case ('rbrt')
call parse_real_variable('rbrt', rbrt, 0.0D0, 10.0D0, &
'Reactor building roof thickness (m)')
case ('rbvfac')
call parse_real_variable('rbvfac', rbvfac, 0.9D0, 3.0D0, &
'Reactor building volume multiplier')
case ('rbwt')
call parse_real_variable('rbwt', rbwt, 0.0D0, 10.0D0, &
'Reactor building wall thickness (m)')
case ('row')
call parse_real_variable('row', row, 0.0D0, 10.0D0, &
'Wall clearance for cranes (m)')
case ('rxcl')
call parse_real_variable('rxcl', rxcl, 0.0D0, 10.0D0, &
'Clearance around reactor (m)')
case ('shmf')
call parse_real_variable('shmf', shmf, 0.0D0, 1.0D0, &
'Fraction of TF shield mass per lift')
case ('shov')
call parse_real_variable('shov', shov, 1.0D3, 1.0D6, &
'Shops and warehouse volume (m3)')
case ('stcl')
call parse_real_variable('stcl', stcl, 0.0D0, 10.0D0, &
'Clearance above crane to roof (m)')
case ('tfcbv')
call parse_real_variable('tfcbv', tfcbv, 1.0D4, 1.0D6, &
'TF coil power conv. bldg volume (m3)')
case ('trcl')
call parse_real_variable('trcl', trcl, 0.0D0, 10.0D0, &
'Transport clearance between comps (m)')
case ('triv')
call parse_real_variable('triv', triv, 1.0D4, 1.0D6, &
'Tritium building volume (m3)')
case ('wgt')
call parse_real_variable('wgt', wgt, 1.0D4, 1.0D6, &
'Reactor building crane capacity (kg)')
case ('wgt2')
call parse_real_variable('wgt2', wgt2, 1.0D4, 1.0D6, &
'Hot cell crane capacity (kg)')
case ('wsvfac')
call parse_real_variable('wsvfac', wsvfac, 0.9D0, 3.0D0, &
'Warm shop building volume multiplier')
case ('aux_build_l')
call parse_real_variable('aux_build_l', aux_build_l, 10.0D0, 1000.0D0, &
'aux building supporting tokamak processes, length (m)')
case ('aux_build_w')
call parse_real_variable('aux_build_w', aux_build_w, 10.0D0, 1000.0D0, &
'aux building supporting tokamak processes, width (m)')
case ('aux_build_h')
call parse_real_variable('aux_build_h', aux_build_h, 1.0D0, 100.0D0, &
'aux building supporting tokamak processes, height (m)')
case ('auxcool_l')
call parse_real_variable('auxcool_l', auxcool_l, 10.0D0, 1000.0D0, &
'Site-Wide Auxiliary Cooling Water facility, length (m)')
case ('auxcool_w')
call parse_real_variable('auxcool_w', auxcool_w, 10.0D0, 1000.0D0, &
'Site-Wide Auxiliary Cooling Water facility, width (m)')
case ('auxcool_h')
call parse_real_variable('auxcool_h', auxcool_h, 1.0D0, 100.0D0, &
'Site-Wide Auxiliary Cooling Water facility, height (m)')
case ('bioshld_thk')
call parse_real_variable('bioshld_thk', bioshld_thk, 0.25D0, 25.0D0, &
'Radial thickness of bio-shield around reactor (m)')
case ('chemlab_l')
call parse_real_variable('chemlab_l', chemlab_l, 10.0D0, 1000.0D0, &
'Chemistry labs and treatment buldings, length (m)')
case ('chemlab_w')
call parse_real_variable('chemlab_w', chemlab_w, 10.0D0, 1000.0D0, &
'Chemistry labs and treatment buldings, width (m)')
case ('chemlab_h')
call parse_real_variable('chemlab_h', chemlab_h, 1.0D0, 100.0D0, &
'Chemistry labs and treatment buldings, height (m)')
case ('control_buildings_l')
call parse_real_variable('control_buildings_l', control_buildings_l, 10.0D0, 1000.0D0, &
'control building, length (m)')
case ('control_buildings_w')
call parse_real_variable('control_buildings_w', control_buildings_w, 10.0D0, 1000.0D0, &
'control building, width (m)')
case ('control_buildings_h')
call parse_real_variable('control_buildings_h', control_buildings_h, 1.0D0, 100.0D0, &
'control building, height (m)')
case ('crane_arm_h')
call parse_real_variable('crane_arm_h', crane_arm_h, 1.0D0, 100.0D0, &
'vertical dimension of crane arm, operating over reactor (m)')
case ('crane_clrnc_h')
call parse_real_variable('crane_clrnc_h', crane_clrnc_h, 0.0D0, 10.0D0, &
'horizontal clearance to building wall for crane operation (m)')
case ('crane_clrnc_v')
call parse_real_variable('crane_clrnc_v', crane_clrnc_v, 0.0D0, 10.0D0, &
'vertical clearance for crane operation (m)')
case ('cryomag_l')
call parse_real_variable('cryomag_l', cryomag_l, 10.0D0, 1000.0D0, &
'Cryogenic Buildings for Magnet and Fuel Cycle, length (m)')
case ('cryomag_w')
call parse_real_variable('cryomag_w', cryomag_w, 10.0D0, 1000.0D0, &
'Cryogenic Buildings for Magnet and Fuel Cycle, width (m)')
case ('cryomag_h')
call parse_real_variable('cryomag_h', cryomag_h, 1.0D0, 100.0D0, &
'Cryogenic Buildings for Magnet and Fuel Cycle, height (m)')
case ('cryostore_l')
call parse_real_variable('cryostore_l', cryostore_l, 10.0D0, 1000.0D0, &
'Magnet Cryo Storage Tanks, length (m)')
case ('cryostore_w')
call parse_real_variable('cryostore_w', cryostore_w, 10.0D0, 1000.0D0, &
'Magnet Cryo Storage Tanks, width (m)')
case ('cryostore_h')
call parse_real_variable('cryostore_h', cryostore_h, 1.0D0, 100.0D0, &
'Magnet Cryo Storage Tanks, height (m)')
case ('cryostat_clrnc')
call parse_real_variable('cryostat_clrnc', cryostat_clrnc, 0.0D0, 10.0D0, &
'vertical clearance from TF coil to cryostat (m)')
case ('elecdist_l')
call parse_real_variable('elecdist_l', elecdist_l, 10.0D0, 1000.0D0, &
'Transformers and electrical distribution facilities, length (m)')
case ('elecdist_w')
call parse_real_variable('elecdist_w', elecdist_w, 10.0D0, 1000.0D0, &
'Transformers and electrical distribution facilities, width (m)')
case ('elecdist_h')
call parse_real_variable('elecdist_h', elecdist_h, 1.0D0, 100.0D0, &
'Transformers and electrical distribution facilities, height (m)')
case ('elecload_l')
call parse_real_variable('elecload_l', elecload_l, 10.0D0, 1000.0D0, &
'Electric (eesential and non-essential) load centres, length (m)')
case ('elecload_w')
call parse_real_variable('elecload_w', elecload_w, 10.0D0, 1000.0D0, &
'Electric (eesential and non-essential) load centres, width (m)')
case ('elecload_h')
call parse_real_variable('elecload_h', elecload_h, 1.0D0, 100.0D0, &
'Electric (eesential and non-essential) load centres, height (m)')
case ('elecstore_l')
call parse_real_variable('elecstore_l', elecstore_l, 10.0D0, 1000.0D0, &
'Energy Storage facilities, length (m)')
case ('elecstore_w')
call parse_real_variable('elecstore_w', elecstore_w, 10.0D0, 1000.0D0, &
'Energy Storage facilities, width (m)')
case ('elecstore_h')
call parse_real_variable('elecstore_h', elecstore_h, 1.0D0, 100.0D0, &
'Energy Storage facilities, height (m)')
case ('fc_building_l')
call parse_real_variable('fc_building_l', fc_building_l, 10.0D0, 1000.0D0, &
'Fuel Cycle facilities, length (m)')
case ('fc_building_w')
call parse_real_variable('fc_building_w', fc_building_w, 10.0D0, 1000.0D0, &
'Fuel Cycle facilities, width (m)')
case ('gas_buildings_l')
call parse_real_variable('gas_buildings_l', gas_buildings_l, 10.0D0, 1000.0D0, &
'air & gas supply (amalgamated) buildings, length (m)')
case ('gas_buildings_w')
call parse_real_variable('gas_buildings_w', gas_buildings_w, 10.0D0, 1000.0D0, &
'air & gas supply (amalgamated) buildings, width (m)')
case ('gas_buildings_h')
call parse_real_variable('gas_buildings_h', gas_buildings_h, 1.0D0, 100.0D0, &
'air & gas supply (amalgamated) buildings, height (m)')
case ('ground_clrnc')
call parse_real_variable('ground_clrnc', ground_clrnc, 0.0D0, 10.0D0, &
'clearance beneath TF coil (m)')
case ('hcd_building_l')
call parse_real_variable('hcd_building_l', hcd_building_l, 10.0D0, 1000.0D0, &
'HCD building, length (m)')
case ('hcd_building_w')
call parse_real_variable('hcd_building_w', hcd_building_w, 10.0D0, 1000.0D0, &
'HCD building, width (m)')
case ('hcd_building_h')
call parse_real_variable('hcd_building_h', hcd_building_h, 1.0D0, 100.0D0, &
'HCD building, height (m)')
case ('hw_storage_l')
call parse_real_variable('hw_storage_l', hw_storage_l, 10.0D0, 1000.0D0, &
'hazardous waste storage building, length (m)')
case ('hw_storage_w')
call parse_real_variable('hw_storage_w', hw_storage_w, 10.0D0, 1000.0D0, &
'hazardous waste storage building, width (m)')
case ('hw_storage_h')
call parse_real_variable('hw_storage_h', hw_storage_h, 1.0D0, 100.0D0, &
'hazardous waste storage building, height (m)')
case ('heat_sink_l')
call parse_real_variable('heat_sink_l', heat_sink_l, 10.0D0, 1000.0D0, &
'heat sinks, length (m)')
case ('heat_sink_w')
call parse_real_variable('heat_sink_w', heat_sink_w, 10.0D0, 1000.0D0, &
'heat sinks, width (m)')
case ('heat_sink_h')
call parse_real_variable('heat_sink_h', heat_sink_h, 1.0D0, 100.0D0, &
'heat sinks, height (m)')
case ('hot_sepdist')
call parse_real_variable('hot_sepdist', hot_sepdist, 0.0D0, 10.0D0, &
'')
case ('hotcell_h')
call parse_real_variable('hotcell_h', hotcell_h, 1.0D0, 100.0D0, &
'hot cell storage component separation distance (m)')
case ('ilw_smelter_l')
call parse_real_variable('ilw_smelter_l', ilw_smelter_l, 10.0D0, 1000.0D0, &
'radioactive waste smelting facility, length (m)')
case ('ilw_smelter_w')
call parse_real_variable('ilw_smelter_w', ilw_smelter_w, 10.0D0, 1000.0D0, &
'radioactive waste smelting facility, width (m)')
case ('ilw_smelter_h')
call parse_real_variable('ilw_smelter_h', ilw_smelter_h, 1.0D0, 100.0D0, &
'radioactive waste smelting facility, height (m)')
case ('ilw_storage_l')
call parse_real_variable('ilw_storage_l', ilw_storage_l, 10.0D0, 1000.0D0, &
'ILW waste storage building, length (m)')
case ('ilw_storage_w')
call parse_real_variable('ilw_storage_w', ilw_storage_w, 10.0D0, 1000.0D0, &
'ILW waste storage building, width (m)')
case ('ilw_storage_h')
call parse_real_variable('ilw_storage_h', ilw_storage_h, 1.0D0, 100.0D0, &
'ILW waste storage building, height (m)')
case ('llw_storage_l')
call parse_real_variable('llw_storage_l', llw_storage_l, 10.0D0, 1000.0D0, &
'LLW waste storage building, length (m)')
case ('llw_storage_w')
call parse_real_variable('llw_storage_w', llw_storage_w, 10.0D0, 1000.0D0, &
'LLW waste storage building, width (m)')
case ('llw_storage_h')
call parse_real_variable('llw_storage_h', llw_storage_h, 1.0D0, 100.0D0, &
'LLW waste storage building, height (m)')
case ('magnet_pulse_l')
call parse_real_variable('magnet_pulse_l', magnet_pulse_l, 10.0D0, 1000.0D0, &
'pulsed magnet power building, length (m)')
case ('magnet_pulse_w')
call parse_real_variable('magnet_pulse_w', magnet_pulse_w, 10.0D0, 1000.0D0, &
'pulsed magnet power building, width (m)')
case ('magnet_pulse_h')
call parse_real_variable('magnet_pulse_h', magnet_pulse_h, 1.0D0, 100.0D0, &
'pulsed magnet power building, height (m)')
case ('magnet_trains_l')
call parse_real_variable('magnet_trains_l', magnet_trains_l, 10.0D0, 1000.0D0, &
'steady state magnet power trains building, length (m)')
case ('magnet_trains_w')
call parse_real_variable('magnet_trains_w', magnet_trains_w, 10.0D0, 1000.0D0, &
'steady state magnet power trains building, width (m)')
case ('magnet_trains_h')
call parse_real_variable('magnet_trains_h', magnet_trains_h, 1.0D0, 100.0D0, &
'steady state magnet power trains building, height (m)')
case ('maint_cont_l')
call parse_real_variable('maint_cont_l', maint_cont_l, 10.0D0, 1000.0D0, &
'maintenance control building, length (m)')
case ('maint_cont_w')
call parse_real_variable('maint_cont_w', maint_cont_w, 10.0D0, 1000.0D0, &
'maintenance control building, width (m)')
case ('maint_cont_h')
call parse_real_variable('maint_cont_h', maint_cont_h, 1.0D0, 100.0D0, &
'maintenance control building, height (m)')
case ('nbi_sys_l')
call parse_real_variable('nbi_sys_l', nbi_sys_l, 10.0D0, 1000.0D0, &
'NBI system length (m)')
case ('nbi_sys_w')
call parse_real_variable('nbi_sys_w', nbi_sys_w, 10.0D0, 1000.0D0, &
'NBI system width (m)')
case ('qnty_sfty_fac')
call parse_real_variable('qnty_sfty_fac', qnty_sfty_fac, 0.0D0, 10.0D0, &
'quantity safety factor for component use during plant lifetime')
case ('reactor_clrnc')
call parse_real_variable('reactor_clrnc', reactor_clrnc, 0.0D0, 10.0D0, &
'clearance around reactor (m)')
case ('reactor_fndtn_thk')
call parse_real_variable('reactor_fndtn_thk', reactor_fndtn_thk, 0.25D0, 25.0D0, &
'reactor building foundation thickness (m)')
case ('reactor_hall_l')
call parse_real_variable('reactor_hall_l', reactor_hall_l, 10.0D0, 1000.0D0, &
'reactor building, length (m)')
case ('reactor_hall_w')
call parse_real_variable('reactor_hall_w', reactor_hall_w, 10.0D0, 1000.0D0, &
'reactor building, width (m)')
case ('reactor_hall_h')
call parse_real_variable('reactor_hall_h', reactor_hall_h, 1.0D0, 100.0D0, &
'reactor building, height (m)')
case ('reactor_roof_thk')
call parse_real_variable('reactor_roof_thk', reactor_roof_thk, 0.25D0, 25.0D0, &
'reactor building roof thickness (m)')
case ('reactor_wall_thk')
call parse_real_variable('reactor_wall_thk', reactor_wall_thk, 0.25D0, 25.0D0, &
'reactor building wall thickness (m)')
case ('robotics_l')
call parse_real_variable('robotics_l', robotics_l, 10.0D0, 1000.0D0, &
'robotics buildings, length (m)')
case ('robotics_w')
call parse_real_variable('robotics_w', robotics_w, 10.0D0, 1000.0D0, &
'robotics buildings, width (m)')
case ('robotics_h')
call parse_real_variable('robotics_h', robotics_h, 1.0D0, 100.0D0, &
'robotics buildings, height (m)')
case ('sec_buildings_l')
call parse_real_variable('sec_buildings_l', sec_buildings_l, 10.0D0, 1000.0D0, &
'security & safety buildings, length (m)')
case ('sec_buildings_w')
call parse_real_variable('sec_buildings_w', sec_buildings_w, 10.0D0, 1000.0D0, &
'security & safety buildings, width (m)')
case ('sec_buildings_h')
call parse_real_variable('sec_buildings_h', sec_buildings_h, 1.0D0, 100.0D0, &
'security & safety buildings, height (m)')
case ('staff_buildings_h')
call parse_real_variable('staff_buildings_h', staff_buildings_h, 1.0D0, 100.0D0, &
'staff buildings height (m)')
case ('staff_buildings_area')
call parse_real_variable('staff_buildings_area', staff_buildings_area, 1.0D4, 1.0D6, &
'footprint of staff buildings (m2)')
case ('transp_clrnc')
call parse_real_variable('transp_clrnc', transp_clrnc, 0.0D0, 10.0D0, &
'transportation clearance between components (m)')
case ('turbine_hall_l')
call parse_real_variable('turbine_hall_l', turbine_hall_l, 10.0D0, 1000.0D0, &
'turbine hall, length (m)')
case ('turbine_hall_w')
call parse_real_variable('turbine_hall_w', turbine_hall_w, 10.0D0, 1000.0D0, &
'turbine hall, width (m)')
case ('turbine_hall_h')
call parse_real_variable('turbine_hall_h', turbine_hall_h, 1.0D0, 100.0D0, &
'turbine hall, height (m)')
case ('tw_storage_l')
call parse_real_variable('tw_storage_l', tw_storage_l, 10.0D0, 1000.0D0, &
'tritiated waste storage building, length (m)')
case ('tw_storage_w')
call parse_real_variable('tw_storage_w', tw_storage_w, 10.0D0, 1000.0D0, &
'tritiated waste storage building, width (m)')
case ('tw_storage_h')
call parse_real_variable('tw_storage_h', tw_storage_h, 1.0D0, 100.0D0, &
'tritiated waste storage building, height (m)')
case ('warm_shop_l')
call parse_real_variable('warm_shop_l', warm_shop_l, 10.0D0, 1000.0D0, &
'warm shop, length (m)')
case ('warm_shop_w')
call parse_real_variable('warm_shop_w', warm_shop_w, 10.0D0, 1000.0D0, &
'warm shop, width (m)')
case ('warm_shop_h')
call parse_real_variable('warm_shop_h', warm_shop_h, 1.0D0, 100.0D0, &
'warm shop, height (m)')
case ('water_buildings_l')
call parse_real_variable('water_buildings_l', water_buildings_l, 10.0D0, 1000.0D0, &
'water, laundry & drainage buildings, length (m)')
case ('water_buildings_w')
call parse_real_variable('water_buildings_w', water_buildings_w, 10.0D0, 1000.0D0, &
'water, laundry & drainage buildings, width (m)')
case ('water_buildings_h')
call parse_real_variable('water_buildings_h', water_buildings_h, 1.0D0, 100.0D0, &
'water, laundry & drainage buildings, height (m)')
case ('workshop_l')
call parse_real_variable('workshop_l', workshop_l, 10.0D0, 1000.0D0, &
'workshop buildings, length (m)')
case ('workshop_w')
call parse_real_variable('workshop_w', workshop_w, 10.0D0, 1000.0D0, &
'workshop buildings, width (m)')
case ('workshop_h')
call parse_real_variable('workshop_h', workshop_h, 1.0D0, 100.0D0, &
'workshop buildings, height (m)')
! Energy storage settings
case ('iscenr')
call parse_int_variable('iscenr', iscenr, 1, 3, &
'Switch for energy storage option')
case ('maxpoloidalpower')
call parse_real_variable('maxpoloidalpower', maxpoloidalpower, 0.0D0, 2.0D3, &
'Maximum permitted absolute rate of change of stored energy in poloidal field (MW)')
! Output file options settings
case ('sect01', 'sect02', 'sect03', 'sect04', 'sect05', &
'sect06', 'sect07', 'sect08', 'sect09', 'sect10', &
'sect11', 'sect12', 'sect13', 'sect14', 'sect15', &
'sect16', 'sect17', 'sect18', 'sect19', 'sect20', &
'sect21')
write(outfile,*) ' '
write(outfile,*) '**********'
write(outfile,*) 'SECT flags are now ignored -'
write(outfile,*) 'please remove them from the input file'
write(outfile,*) '**********'
write(outfile,*) ' '
! Vacuum system settings
case ('vacuum_model')
call parse_string_variable('vacuum_model', vacuum_model, 'vacuum_model')
case ('ntype')
call parse_int_variable('ntype', ntype, 0, 1, &
'Pump type')
case ('pbase')
call parse_real_variable('pbase', pbase, 1.0D-8, 1.0D-3, &
'Base pressure (Pa)')
case ('prdiv')
call parse_real_variable('prdiv', prdiv, 0.0D0, 10.0D0, &
'Divertor chamber pressure in burn (Pa)')
case ('pumptp')
call parse_real_variable('pumptp', pumptp, 0.0D0, 1.0D30, &
'Pump throughput (molecules/s) (default is ITER value)')
case ('rat')
call parse_real_variable('rat', rat, 1.0D-10, 1.0D-6, &
'Plas chamber wall outgas rate (Pa-m/s)')
case ('tn')
call parse_real_variable('tn', tn, 1.0D0, 1.0D3, &
'Neutral gas temp in chamber (K)')
case ('dwell_pump')
call parse_int_variable('dwell_pump', dwell_pump, 0, 2, &
'switch for dwell pumping options')
case ('pumpareafraction')
call parse_real_variable('pumpareafraction', pumpareafraction, 1.0D-6, 1.0D0, &
'Area of one pumping port as a fraction of plasma surface area')
case ('pumpspeedmax')
call parse_real_variable('pumpspeedmax', pumpspeedmax, 1.0D-6, 1.0D3, &
'Maximum pumping speed per unit area for deuterium & tritium, molecular flow')
case ('pumpspeedfactor')
call parse_real_variable('pumpspeedfactor', pumpspeedfactor, 1.0D-6, 1.0D0, &
'Effective pumping speed reduction factor due to duct impedance')
case ('initialpressure')
call parse_real_variable('initialpressure', initialpressure, 1.0D-6, 1.0D4, &
'initial neutral pressure at the beginning of the dwell phase (Pa)')
case ('outgasindex')
call parse_real_variable('outgasindex', outgasindex, 1.0D-6, 1.0D3, &
'outgassing decay index')
case ('outgasfactor')
call parse_real_variable('outgasfactor', outgasfactor, 1.0D-6, 1.0D3, &
'outgassing prefactor kw: outgassing rate at 1 s per unit area (Pa m s-1)')
! Reinke criterion
case ('lhat')
call parse_real_variable('lhat', lhat, 1.0D0, 1.5D1, &
'connection length factor')
case ('reinke_mode')
call parse_int_variable('reinke_mode', reinke_mode, 0, 1, &
'Switch for Reinke Criterion mode (0=H, 1=I)')
case ('impvardiv')
call parse_int_variable('impvardiv', impvardiv, 3, nimp, &
'Index of impurity to be iterated for Reike criterion')
! Stellarator settings
case ('istell')
call parse_int_variable('istell', istell, 0, 6, &
'Stellarator machine specification (1=Helias5, 2=Helias4, 3=Helias3, 4=W7X50, 5=W7X30, 6=jsoninput)')
case ('bmn')
call parse_real_variable('bmn', bmn, 1.0D-4, 1.0D-2, &
'Relative radial field perturbation')
case ('max_gyrotron_frequency')
call parse_real_variable('max_gyrotron_frequency', max_gyrotron_frequency, 1.0d9, 1.0d14, &
'Maximum avail. gyrotron frequency')
case ('te0_ecrh_achievable')
call parse_real_variable('te0_ecrh_achievable', te0_ecrh_achievable, 1.0d0, 1.0d3, &
'Maximum achievable ecrh temperature (peak value)')
case ('f_asym')
call parse_real_variable('f_asym', f_asym, 0.9D0, 2.0D0, &
'Heat load peaking factor')
case ('f_rad')
call parse_real_variable('f_rad', f_rad, 0.0D0, 1.0D0, &
'Radiated power fraction in SOL')
case ('f_w')
call parse_real_variable('f_w', f_w, 0.1D0, 1.0D0, &
'Island size fraction factor')
case ('fdivwet')
call parse_real_variable('fdivwet', fdivwet, 0.01D0, 1.0D0, &
'Wetted area fraction of divertor plates')
case ('flpitch')
call parse_real_variable('flpitch', flpitch, 1.0D-4, 1.0D-2, &
'Field line pitch (rad)')
case ('iotabar')
call parse_real_variable('iotabar', iotabar, 0.1D0, 10.0D0, &
'Stellarator rotational transform (at s=2/3)')
case ('isthtr')
call parse_int_variable('isthtr', isthtr, 1, 3, &
'Stellarator method of auxiliary heating')
case ('m_res')
call parse_int_variable('m_res', m_res, 1, 10, &
'Poloidal resonance number')
case ('n_res')
call parse_int_variable('n_res', n_res, 3, 6, &
'Toroidal resonance number')
case ('shear')
call parse_real_variable('shear', shear, 0.1D0, 10.0D0, &
'Magnetic shear')
! Inertial Fusion Energy plant settings
case ('ife')
call parse_int_variable('ife', ife, 0, 1, &
'Switch for Inertial Fusion Energy model')
case ('bldr')
call parse_real_variable('bldr', bldr, 0.0D0, 10.0D0, &
'IFE blanket radial thickness (m)')
case ('bldrc')
call parse_real_variable('bldrc', bldrc, 0.0D0, 10.0D0, &
'IFE curtain radial thickness (m)')
case ('bldzl')
call parse_real_variable('bldzl', bldzl, 0.0D0, 10.0D0, &
'IFE blanket bottom part thickness (m)')
case ('bldzu')
call parse_real_variable('bldzu', bldzu, 0.0D0, 10.0D0, &
'IFE blanket top part thickness (m)')
case ('blmatf') ! N.B. actually a 2-D array
call parse_real_array('blmatf', blmatf, isub1, 3*(maxmat+1), &
'IFE blanket material fraction', icode)
case ('cdriv0')
call parse_real_variable('cdriv0', cdriv0, 50.0D0, 500.0D0, &
'IFE driver cost offset (M$)')
case ('cdriv1')
call parse_real_variable('cdriv1', cdriv1, 50.0D0, 500.0D0, &
'IFE driver cost offset (M$)')
case ('cdriv2')
call parse_real_variable('cdriv2', cdriv2, 50.0D0, 500.0D0, &
'IFE driver cost offset (M$)')
case ('chdzl')
call parse_real_variable('chdzl', chdzl, 0.0D0, 10.0D0, &
'IFE chamber bottom part thickness (m)')
case ('chdzu')
call parse_real_variable('chdzu', chdzu, 0.0D0, 10.0D0, &
'IFE chamber top part thickness (m)')
case ('chmatf')
call parse_real_array('chmatf', chmatf, isub1, maxmat+1, &
'IFE chamber material fraction', icode)
case ('chrad')
call parse_real_variable('chrad', chrad, 0.1D0, 20.0D0, &
'IFE chamber radial thickness (m)')
case ('dcdrv0')
call parse_real_variable('dcdrv0', dcdrv0, 0.0D0, 200.0D0, &
'IFE driver cost gradient (M$/MJ)')
case ('dcdrv1')
call parse_real_variable('dcdrv1', dcdrv1, 0.0D0, 200.0D0, &
'IFE driver cost gradient (M$/MJ)')
case ('dcdrv2')
call parse_real_variable('dcdrv2', dcdrv2, 0.0D0, 200.0D0, &
'IFE driver cost gradient (M$/MJ)')
case ('drveff')
call parse_real_variable('drveff', drveff, 0.01D0, 1.0D0, &
'IFE driver efficiency')
case ('edrive')
call parse_real_variable('edrive', edrive, 1.0D5, 50.0D8, &
'IFE driver energy (J)')
case ('etali')
call parse_real_variable('etali', etali, 0.0D0, 1.0D0, &
'IFE lithium pump wall plug efficiency')
case ('etave')
call parse_real_array('etave', etave, isub1, 10, &
'IFE driver efficiency vs driver energy', icode)
case ('fauxbop')
call parse_real_variable('fauxbop', fauxbop, 0.0D0, 1.0D0, &
'Frac. of gross electric power to BOP (IFE)')
case ('fbreed')
call parse_real_variable('fbreed', fbreed, 0.0D0, 0.999D0, &
'Fraction of breeder outside core')
case ('fburn')
call parse_real_variable('fburn', fburn, 0.01D0, 1.0D0, &
'IFE burn fraction')
case ('flirad')
call parse_real_variable('flirad', flirad, 0.0D0, 10.0D0, &
'Radius of FLiBe inlet (HYLIFE) (m)')
case ('frrmax')
call parse_real_variable('frrmax', frrmax, 1.0D-6, 1.0D0, &
'F-value for IFE repetition rate')
case ('fwdr')
call parse_real_variable('fwdr', fwdr, 0.0D0, 10.0D0, &
'IFE first wall radial thickness (m)')
case ('fwdzl')
call parse_real_variable('fwdzl', fwdzl, 0.0D0, 10.0D0, &
'IFE first wall bottom part thickness (m)')
case ('fwdzu')
call parse_real_variable('fwdzu', fwdzu, 0.0D0, 10.0D0, &
'IFE first wall top part thickness (m)')
case ('fwmatf') ! N.B. actually a 2-D array
call parse_real_array('fwmatf', fwmatf, isub1, 3*(maxmat+1), &
'IFE first wall material fraction', icode)
case ('gainve')
call parse_real_array('gainve', gainve, isub1, 10, &
'IFE target gain vs driver energy', icode)
case ('htpmw_ife')
call parse_real_variable('htpmw_ife', htpmw_ife, 0.0D0, 1.0D3, &
'IFE heat transport system electrical pump power (MW)')
case ('ifedrv')
call parse_int_variable('ifedrv', ifedrv, -1, 3, &
'IFE driver type')
case ('ifetyp')
call parse_int_variable('ifetyp', ifetyp, 0, 4, &
'IFE device build type')
case ('mcdriv')
call parse_real_variable('mcdriv', mcdriv, 0.1D0, 10.0D0, &
'IFE driver cost multiplier')
case ('pdrive')
call parse_real_variable('pdrive', pdrive, 1.0D6, 200.0D6, &
'IFE driver power to target (W)')
case ('pfusife')
call parse_real_variable('pfusife', pfusife, 0.0D0, 1.0D4, &
'IFE input fusion power (MW) (ifedrv=3 only)')
case ('pifecr')
call parse_real_variable('pifecr', pifecr, 0.0D0, 100.0D0, &
'IFE cryogenic power (MW)')
case ('ptargf')
call parse_real_variable('ptargf', ptargf, 0.1D0, 100.0D0, &
'IFE target factory power at 6Hz (MW)')
case ('rrin')
call parse_real_variable('rrin', rrin, 0.1D0, 50.0D0, &
'Input IFE repetition rate (Hz) (ifedrv=3 only)')
case ('rrmax')
call parse_real_variable('rrmax', rrmax, 1.0D0, 50.0D0, &
'Maximum IFE repetition rate (Hz)')
case ('shdr')
call parse_real_variable('shdr', shdr, 0.0D0, 10.0D0, &
'IFE shield radial thickness (m)')
case ('shdzl')
call parse_real_variable('shdzl', shdzl, 0.0D0, 10.0D0, &
'IFE shield bottom part thickness (m)')
case ('shdzu')
call parse_real_variable('shdzu', shdzu, 0.0D0, 10.0D0, &
'IFE shield top part thickness (m)')
case ('shmatf') ! N.B. actually a 2-D array
call parse_real_array('shmatf', shmatf, isub1, 3*(maxmat+1), &
'IFE shield material fraction', icode)
case ('sombdr')
call parse_real_variable('sombdr', sombdr, 0.0D0, 10.0D0, &
'Radius of SOMBRERO blanket bottom (m)')
case ('somtdr')
call parse_real_variable('somtdr', somtdr, 0.0D0, 10.0D0, &
'Radius of SOMBRERO blanket top (m)')
case ('tgain')
call parse_real_variable('tgain', tgain, 1.0D0, 500.0D0, &
'IFE target gain')
case ('uccarb')
call parse_real_variable('uccarb', uccarb, 10.0D0, 1.0D3, &
'Cost of carbon cloth ($/kg)')
case ('ucconc')
call parse_real_variable('ucconc', ucconc, 0.1D0, 1.0D3, &
'Cost of concrete ($/kg)')
case ('ucflib')
call parse_real_variable('ucflib', ucflib, 10.0D0, 1.0D3, &
'Cost of FLiBe ($/kg)')
case ('uctarg')
call parse_real_variable('uctarg', uctarg, 0.1D0, 1.0D3, &
'Cost per IFE target ($/target)')
case ('v1dr')
call parse_real_variable('v1dr', v1dr, 0.0D0, 10.0D0, &
'IFE void 1 radial thickness (m)')
case ('v1dzl')
call parse_real_variable('v1dzl', v1dzl, 0.0D0, 10.0D0, &
'IFE void 1 bottom part thickness (m)')
case ('v1dzu')
call parse_real_variable('v1dzu', v1dzu, 0.0D0, 10.0D0, &
'IFE void 1 top part thickness (m)')
case ('v1matf') ! N.B. actually a 2-D array
call parse_real_array('v1matf', v1matf, isub1, 3*(maxmat+1), &
'IFE void 1 material fraction', icode)
case ('v2dr')
call parse_real_variable('v2dr', v2dr, 0.0D0, 10.0D0, &
'IFE void 2 radial thickness (m)')
case ('v2dzl')
call parse_real_variable('v2dzl', v2dzl, 0.0D0, 10.0D0, &
'IFE void 2 bottom part thickness (m)')
case ('v2dzu')
call parse_real_variable('v2dzu', v2dzu, 0.0D0, 10.0D0, &
'IFE void 2 top part thickness (m)')
case ('v2matf') ! N.B. actually a 2-D array
call parse_real_array('v2matf', v2matf, isub1, 3*(maxmat+1), &
'IFE void 2 material fraction', icode)
case ('v3dr')
call parse_real_variable('v3dr', v3dr, 0.0D0, 50.0D0, &
'IFE void 3 radial thickness (m)')
case ('v3dzl')
call parse_real_variable('v3dzl', v3dzl, 0.0D0, 30.0D0, &
'IFE void 3 bottom part thickness (m)')
case ('v3dzu')
call parse_real_variable('v3dzu', v3dzu, 0.0D0, 30.0D0, &
'IFE void 3 top part thickness (m)')
case ('v3matf') ! N.B. actually a 2-D array
call parse_real_array('v3matf', v3matf, isub1, 3*(maxmat+1), &
'IFE void 3 material fraction', icode)
! Water usage settings
case ('airtemp')
call parse_real_variable('airtemp', airtemp, -15.0D0, 40.0D0, &
'ambient air temperature (degrees C)')
case ('watertemp')
call parse_real_variable('watertemp', watertemp, 0.0D0, 25.0D0, &
'water temperature (degrees C)')
case ('windspeed')
call parse_real_variable('windspeed', windspeed, 0.0D0, 10.0D0, &
'wind speed (m/s)')
! CS fatigue settings
case('residual_sig_hoop')
call parse_real_variable('residual_sig_hoop',residual_sig_hoop, 0.0D0, 1.0D9, &
'residual hoop stress in strucutal material (Pa) ')
case('n_cycle_min')
call parse_real_variable('n_cycle_min',n_cycle_min, 0.0D0, 1.0D8, &
'Minimum required cycles for CS')
case('t_crack_radial')
call parse_real_variable('t_crack_radial',t_crack_radial, 1.0D-5, 1.0D0, &
'Inital radial crack size (m)')
case('t_crack_vertical')
call parse_real_variable('t_crack_vertical',t_crack_vertical, 1.0D-5, 1.0D0, &
'Inital vertical crack size (m)')
case('t_structural_radial')
call parse_real_variable('t_structural_radial',t_structural_radial, 1.0D-3, 1.0D0, &
'CS structural radial thickness (m)')
case('t_structural_vertical')
call parse_real_variable('t_structural_vertical',t_structural_vertical, 1.0D-3, 1.0D0, &
'CS structural vertical thickness (m)')
case('ld_ratio_cst')
call parse_real_variable('ld_ratio_cst',ld_ratio_cst, 0.0D0, 5.0D0, &
'CS coil turn conduit length to depth ratio')
case('bkt_life_csf')
call parse_real_variable('bkt_life_csf',bkt_life_csf, 0.0D0, 1.0D0, &
'Switch for bkt_life -> n_cycle_min')
case('sf_vertical_crack')
call parse_real_variable('sf_vertical_crack',sf_vertical_crack, 1.0D0, 1.0D1, &
'Safety factor for vertical crack size (-)')
case('sf_radial_crack')
call parse_real_variable('sf_radial_crack',sf_radial_crack, 1.0D0, 1.0D1, &
'Safety factor for radial crack size (-)')
case('sf_fast_fracture')
call parse_real_variable('sf_fast_fracture',sf_fast_fracture, 1.0D0, 1.0D1, &
'safety factor for stress intensity factor (-)')
case('paris_coefficient')
call parse_real_variable('paris_coefficient',paris_coefficient, 1.0D-20, 1.0D1, &
'Paris equation material coefficient (-)')
case('paris_power_law')
call parse_real_variable('paris_power_law',paris_power_law, 1.0D0, 1.0D1, &
'Paris equation material power law (-)')
case('walker_coefficient')
call parse_real_variable('walker_coefficient',walker_coefficient, 1.0D-1, 1.0D1, &
'walker coefficient (-)')
case('fracture_toughness')
call parse_real_variable('fracture_toughness',fracture_toughness, 1.0D-1, 1.0D8, &
'fracture toughness (MPa m^1/2)')
case default
error_message = 'Unknown variable in input file: '//varnam(1:varlen)
write(*,*) error_message
write(*,*) 'Error occurred at this line in the IN.DAT file:', lineno
write(*,*) line
error = .True.
end select variable
! Uncomment the following to abort the code if an obsolete variable name
! has been found in the input file
if (obsolete_var) then
error_message = 'Obsolete variable specified'
write(*,*) error_message
write(*,*) 'Error occurred at this line in the IN.DAT file: ', lineno
write(*,*) line
obsolete_var = .false.
error = .True.
end if
! If we have just read in an array, a different loop-back is needed
if (icode == -1) goto 20
cycle
end do loop_over_lines
if(neqns == 0) then
! The value of neqns has not been set in the input file. Default = 0.
neqns = no_constraints - nineqns
else
! The value of neqns has been set in the input file.
nineqns = no_constraints - neqns
end if
nvar = no_iteration
if (error .eqv. .True.) stop 1
! MDK Try allocating here
if (allocated(name_xc)) deallocate(name_xc)
allocate(name_xc(nvar))
! Ensure array is initialised
name_xc = ""
end subroutine parse_input_file